[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] CSR



Hi,

> -----Original Message-----
> From: Frank Meyering [mailto:meyering@xxxxxxx.de]
> Sent: Friday, September 15, 2000 2:31 PM
> To: bluetooth-dev@xxxxxxx.com
> Subject: [bluetooth-dev] CSR
> 
> 
> Hi,
> 
> CSR has announced version beta-5 of the firmware for their 
> developer kit.
> This version provides HCI-UART (H4) compatible transfers. It 
> works now with
> the axis stack, but I found out some (little) problems:
> - It is not possible to set the baud rate in the CSR-Hardware 
> "on the fly"
> (you have to set it in the Firmware with the flash tool). If 
> there is a
> possibility, there should be a hardware-switch (-i csr), 
> which works only
> with one baud rate (115200 bit/s as default).

sure, let us know the details for initialization and we'll add it.
Or do it yourself and send us a patch.

> - The hci_reset() is causing trouble. The Kit works much 
> better without this
> command during init. I don't know why, but I'll try to find out, what
> happens.

let us know if you find out and we'll add a patch

> - The read_ericsson_rev_info command is not understood (who 
> can imagine
> ...). There should be a hardware flag also in hci.c. Maybe 
> you have to set
> with ioctl's.

sure, we'll fix this

> 
> best regards
> 
> Frank
> '

brgds
/Mattias Ågren


> --------------------------------------------------------------
> | Dipl.-Ing. Frank Meyering        | Phone: +49-2842-981411  |
> | IMST GmbH                        | Fax:   +49-2842-981499  |
> | Communication Systems & Networks |                         |
> | Carl-Friedrich-Gauss-Str. 2      | EMail: meyering@xxxxxxx.de |
> | 47475 Kamp-Lintfort              | http://www.imst.de      |
> | Germany                          |                         |
> --------------------------------------------------------------
>