[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] Client Connection over Null Modem



Hi,

> After these setting, in the client side in the menu, when i type:
> >con 00:00:00:00:00:00 0
> >profile 0  => hold in this state

Whether you got any response for this problem. I am also facing the same
probelm. Please let me know if you got a solution for this.

Thanks
S Chervirala

----- Original Message -----
From: Chan Wing Cheong <ee_cwcaf@xxxxxxx.hk>
To: <lprema@xxxxxxx.com>
Cc: <bluetooth-dev@xxxxxxx.com>
Sent: Sunday, September 10, 2000 3:03 PM
Subject: Re: [bluetooth-dev] Client Connection over Null Modem


> Dear All,
> After these setting, in the client side in the menu, when i type:
> >con 00:00:00:00:00:00 0
> >profile 0  => hold in this state
>
> In the same time , the debug window show the it can't find the bt address.
> I want to ask any people face this problem before? any solution can solve
> this?
> Thanks a lot,
> >From
> Eric Chan
> HKUST
>
>
>
> On Sat, 7 Oct 2000 lprema@xxxxxxx.com wrote:
>
> > Haiii
> >    Just check it out this probably helps U
> >
> >
> >  At the btconfig.h file (/include/linux/bluetooth/btconfig.h)
> >    ==>  #define HCI_EMULATION (line #44)  file://uncomment the line
> >  created 'options.ttyBT0' file under directory /usr/sbin/ and /etc/ppp/
> >
> >   - the contents of options.ttyBT0 (the same file was created under both
> > /usr/sbin/ and /etc/ppp/ directory)
> >    ( client side )
> >
> >      noauth nodeflate
> >      mtu 256
> >      debug
> >      local
> >
> >    (Server side)
> >     noauth nodeflate plock
> >     mtu 256
> >     debug
> >     local
> >     silent
> >     211.47.47.4:311.47.47.9  ---> in my case (you have to change with
> > your settings)
> >     (211.47.47.4:311.47.47.9  == Host IP addr:Local IP addr)
> >
> > // Now compile the module also!!
> >
> > #cd Bluetooth
> > #cd src
> > # make -clean
> > #make
> >
> > file://now go to the Apps  directory
> >
> > #cd Bluetooth
> > #cd apps
> > #make -clean
> > #make
> >
> > // now insert the modeule  so go bak to src directory   this U have to
do
> > it for every time file://U restrt the machine
> >
> > #cd Bluetooth
> > #cd src
> > #cd insmod bt.o
> >
> > // make the port
> >
> > # mknode.... what ever the commamd it is their in the Readme.txt
> >
> >
> >
> > Then I executed 'btd'.
> > (At the moment, Server Linux PC was connected to ethernet port but
Client
> > PC was not.)
> >
> >  Server side
> >  $./btd -u /dev/ttyS1  -r server -i no_hw -e 0
> > ==> the results are
> >  Bluetooth Control Application
> > -----------------------------
> > Running as server
> > ...
> >
> > Using interface ppp0
> > Connect: ppp0 <--> /dev/ttyBT0
> >
> > ==> Holding state
> >
> > o Client side
> >   $./btd -u /dev/ttyS1 -r client -i no_hw -e 0
> > ==> the results are
> >  Bluetooth Control Application
> > -----------------------------
> > Running as client
> > ....
> >
> > Menu
> > -----------------------
> > con <xx:xx:xx:xx:xx:xx> <profile>
> > ....
> >
> > ppp
> > quit
> > >              ( ==> Holding state)
> > > con 00:00:00:00:00:00 0
> > > ppp
> > Starting ppp client on /dev/ttyBT0
> > Spawned pppd[1027] in the background.
> > Using interface ppp0
> > Connect: ppp<--> /dev/ttyBT0
> > .....
> >
> >
> > When the connection is established, you can open another window (at the
> > side of client or server)
> >  then you can ping or telnet.
> >
> > All the Best
> >
> > Best regards
> > Premalatha
> >
> >
> >
> >
> >
> >
>