[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [bluetooth-dev] acl packet transmit
My final purpose is to do a bluetoothfiletransfer.
But actually I'm right now just setting up a connection.
I think this works wel..
But I can't get any byte send from one site to the other.
I use a functioncall to l2cap_send_data
When debugging I notice nothing is send to the local bluetooth chip.
In function hci_send_data I notice the remark data is left in buffers..
I'm very curious when it would get out again.
But you would also help me telling me which bytes should be sent to the
local device so that I can receive a ACL packet at the remote site..
Hoping you understand me.. If not... I'll try explaining again..
It's important for me to get it done (this week)
Thnx very much,
----- Original Message -----
From: "Ben Walter" <email@example.com>
To: "Walter" <Walter.van.Berkel@xxxxxxx.nl>
Sent: Tuesday, November 21, 2000 3:36 PM
Subject: Re: [bluetooth-dev] acl packet transmit
> Hi Walter,
> Could you explain a little more about what you're trying to do?
> ----- Original Message -----
> From: "Walter" <Walter.van.Berkel@xxxxxxx.nl>
> To: "Blue tooth list" <firstname.lastname@example.org>
> Sent: Tuesday, November 21, 2000 9:38 PM
> Subject: [bluetooth-dev] acl packet transmit
> > Hello..
> > I've set up a connection between 2 devices.
> > Could somebody please explain how I can send data from one to another
> > device?
> > I can't get it done... :-(
> > Thnx very much!
> > W.
> > -
> > To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
> > the body of a message to email@example.com
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to firstname.lastname@example.org