[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] acl packet transmit



Hi Walter,

Perhaps you could let us see the code that's preparing the bt_tx_buf and
calling l2cap_send_data?   In the meantime, make sure that you're setting
the cur_len member of the bt_tx_buf structure to indicate the amount of data
you'd like to send.

Best,

Ben

----- Original Message -----
From: "Walter" <Walter.van.Berkel@xxxxxxx.nl>
To: "Ben Walter" <bwalter@xxxxxxx.com>
Cc: "Blue tooth list" <bluetooth-dev@xxxxxxx.com>
Sent: Tuesday, November 21, 2000 10:24 PM
Subject: Re: [bluetooth-dev] acl packet transmit


> Well,
> My final purpose is to do a bluetoothfiletransfer.
> But actually I'm right now just setting up a connection.
> I think this works wel..
> But I can't get any byte send from one site to the other.
> I use a functioncall to l2cap_send_data
> When debugging I notice nothing is send to the local bluetooth chip.
> In function hci_send_data I notice the remark data is left in buffers..
> I'm very curious when it would get out again.
>
> But you would also help me telling me which bytes should be sent to the
> local device so that I can receive a ACL packet at the remote site..
>
> Hoping you understand me.. If not... I'll try explaining again..
> It's important for me to get it done (this week)
> Thnx very much,
>
> Walter
>
>
> ----- Original Message -----
> From: "Ben Walter" <bwalter@xxxxxxx.com>
> To: "Walter" <Walter.van.Berkel@xxxxxxx.nl>
> Sent: Tuesday, November 21, 2000 3:36 PM
> Subject: Re: [bluetooth-dev] acl packet transmit
>
>
> > Hi  Walter,
> >
> > Could you explain a little more about what you're trying to do?
> >
> > Ben
> >
> >
> >
> > ----- Original Message -----
> > From: "Walter" <Walter.van.Berkel@xxxxxxx.nl>
> > To: "Blue tooth list" <bluetooth-dev@xxxxxxx.com>
> > Sent: Tuesday, November 21, 2000 9:38 PM
> > Subject: [bluetooth-dev] acl packet transmit
> >
> >
> > > Hello..
> > > I've set up a connection between 2 devices.
> > > Could somebody please explain how I can send data from one to another
> > > device?
> > > I can't get it done... :-(
> > > Thnx very much!
> > >
> > > W.
> > >
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe
bluetooth-dev"
> > in
> > > the body of a message to majordomo@xxxxxxx.com
> > >
> >
>
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
in
> the body of a message to majordomo@xxxxxxx.com
>

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com