[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] Evaluations of Axis bluetooth 20001031 and 1115. with null modem



Hi,
 i can set up rf_conn connection in usermode now. Thanks a lot!!!
i still want to ask after i key in ppp in KERNEL MODE, it gave out the following messages:
> ppp
close_device
Using interface ppp0
Connect: ppp0 <--> /dev/ttyBT0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8a6a25b9> <pcomp> <accomp>]
......etc etc

However, when i try to check if there is PPP connection or not by typing 'ifconfig ppp0'
, it indicated there was a ppp connection set up.
Could you explain this phenomenon?

Thanks!!

Raymond






> ee_wht@xxxxxxx.hk wrote:
> 
> > Hi,
> >
> > i tried it again with your suggestions. i still found the 0 SCO buffers. Here attached with debug messages
> > debug_1115s ---> Server
> > debug_1115c ---> Clinet
> >
> 
> It looks like you're attaching to the wrong BD address. On the server, it reports that its BD address is
> 00:d0:b7:03:31:51. But you try to attach from the client to 00:d0:b7:03:31:8b. Try that other address.
> 
> > Happy New Year!!
> >
> 
> And to you as well.
> 
> --Gordon
> 
> 
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
> 

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com