[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[bluetooth-dev] Connection breaks after trying appletviewer over ppp



 Hello everyone,

I have this problem in using appletviewer over the PPP connection with BT as
the bearer.  Sometimes, it work; sometimes, it doesn't!!  One of the error
message is 

BT SYS:  ERROR :get_inbuffer: WARNING! No inbuffer with hci_hdl 32
Segmentation fault

and the ppp connection breaks for the client side!

Sometimes, on pinging the other party from either sides, would also yield
error messages of CRC check failed, unknown HCI type, Bad UART baud rate(I
use 57600)?, etc on either the server or client.  An example on the client
side is shown below:

BT SYS:  ERROR :crc_check: CRC check failed
BT SYS:  ERROR :hci_receive_data: 0x00 is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 50, data_len 64
Bad UART baud rate ? Check if baudrate really was successfully set in HW
Resetting state machine and trying to resync
BT SYS:  ERROR :crc_check: CRC check failed
BT SYS:  ERROR :hci_receive_data: 0x00 is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 33, data_len 135
Bad UART baud rate ? Check if baudrate really was successfully set in HW
Resetting state machine and trying to resync
BT SYS:  ERROR :hci_receive_data: 0x67 is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 56, data_len 135
Bad UART baud rate ? Check if baudrate really was successfully set in HW
BT SYS:  ERROR :hci_receive_data: 0x01 is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 56, data_len 135
Bad UART baud rate ? Check if baudrate really was successfully set in HW
Resetting state machine and trying to resync
BT SYS:  ERROR :hci_receive_data: 0x01 is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 56, data_len 135
Bad UART baud rate ? Check if baudrate really was successfully set in HW
BT SYS:  ERROR :hci_receive_data: 0x74 is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 64, data_len 135
Bad UART baud rate ? Check if baudrate really was successfully set in HW
Resetting state machine and trying to resync
BT SYS:  ERROR :hci_receive_data: 0x74 is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 64, data_len 135
Bad UART baud rate ? Check if baudrate really was successfully set in HW
.................
BT SYS:  ERROR :hci_receive_data: 0x2d is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 56, data_len 120
Bad UART baud rate ? Check if baudrate really was successfully set in HW
Resetting state machine and trying to resync
BT SYS:  ERROR :hci_receive_data: 0x2d is an unknown HCI type!
lst rec data pointer 0xbf5fed08, count 56, data_len 120
Bad UART baud rate ? Check if baudrate really was successfully set in HW
BT SYS:  ERROR :get_inbuffer: WARNING! No inbuffer with hci_hdl 1334
Segmentation fault

Any help to solve this problem would be really appreciated!

Rgds,
Garion
(Happy Chinese New Year to everyone!)



-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com