[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[bluetooth-dev] rf_conn hangs



Hello,

After having successfully used version 20000814 (connection
establishment and ppp running), I have a problem with
version 20010108: the rf_conn command hangs (see the trace A below).

The axis stack runs on 2 different linux machines, each
one connected via a serial link to 2 windows machines where
Digianswer PCMCIA devices are plugged in and an HCI router
is running.

The observed HCI commands in the router are annexed in trace B.

I first thought that the Digianswer is limited and doesn't
support some HCI commands. The new Axis stack could use
one of them and the old one doesn't. However, even in the
simplest test case of HCI emulation, I have the same results: 
20000814 works and 20010108 hangs (see the trace B below).


Bernard


*********************************   TRACE A 
*********************************
********************************* Digianswer
*********************************
********************************** 20000814
**********************************

-----> Client 1 side

root@bellevue:/home/bpe/bluetooth/axis/20010108/apps/btd >
./btd_bellevue -r client -s 9600
Bluetooth Control Application
-----------------------------
Running as client
Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Registered bluetooth line discipline on /dev/ttyS0
Init stack
Setting write_scan_enable in Ericsson module!
Setting baudrate in Ericsson module!
Now entering cmd line mode

Menu
------------------------
  inq (inquiry scan)
  rf_conn <xx:xx:xx:xx:xx:xx> <srv ch> <line>
  rf_send <nbr bytes> <nbr repeats> <line>
  rf_disc <line>
  rf_wait <line>
  me <1/0>
  setbd <xx:xx:xx:xx:xx:xx>
  readbd
  reset
  ppp
  inqscan
  quit
> readbd
Current bd addr : 00:00:00:00:00:00
> readbd
Current bd addr : 00:50:CD:00:06:41
> readbd
Current bd addr : 00:50:CD:00:06:41
> rf_conn 00:50:CD:00:06:40 0 0
root@bellevue:/home/bpe/bluetooth/axis/20010108/apps/btd > quit
bash: quit: command not found
root@bellevue:/home/bpe/bluetooth/axis/20010108/apps/btd > rmmod bt
root@bellevue:/home/bpe/bluetooth/axis/20010108/apps/btd > cd
/home/bpe/bluetooth/axis/works/src
root@xxxxxxx.o
root@xxxxxxx./apps/
root@bellevue:/home/bpe/bluetooth/axis/works/apps > ls
Makefile  btd.c   btd.h  btd_bellevue       btd_silex       hcitest.c
btd       btd.c~  btd.o  btd_bellevue_test  btd_silex_test  userstack
root@xxxxxxx./btd_bellevue -i 0
-r client -s 9600
Bluetooth Control Application
-----------------------------
Running as client
Serdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Opening dev /dev/ttyS0
Initiating physical driver
Registered bluetooth line discipline on /dev/ttyS0
Opening dev /dev/ttyBT0
Init stack
Modem emulation set to 0
No hw init done
Now entering cmd line mode

Menu
------------------------
  inq (inquiry scan)
  con <xx:xx:xx:xx:xx:xx> <profile>
  disc <handle>
  send <nbr bytes> <nbr repeats>
  me <1/0>
  setbd <xx:xx:xx:xx:xx:xx>
  readbd
  reset
  ppp
  inqscan
  quit
> readbd
Current bd addr : 00:50:CD:00:06:41
> inqscan
Setting write_scan_enable in Digianswer router
> ppp
close_device
Starting ppp client on /dev/ttyBT0
Spawned pppd[470] in the background.
Using interface ppp0
Connect: ppp0 <--> /dev/ttyBT0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8ce4c59> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x60cdd1c1> <pcomp>
<accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x60cdd1c1> <pcomp>
<accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8ce4c59> <pcomp>
<accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x8ce4c59> <pcomp>
<accomp>]
sent [LCP EchoReq id=0x0 magic=0x8ce4c59]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoReq id=0x0 magic=0x60cdd1c1]
sent [LCP EchoRep id=0x0 magic=0x8ce4c59]
rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x1 <addr 10.1.1.2>]
rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoRep id=0x0 magic=0x60cdd1c1]
rcvd [IPCP ConfNak id=0x1 <addr 10.0.0.1>]
sent [IPCP ConfReq id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
rcvd [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Deflate (15) compression enabled
rcvd [IPCP ConfReq id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
sent [IPCP ConfAck id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
rcvd [IPCP ConfAck id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
not replacing existing default route to eth0 [138.131.170.10]
local  IP address 10.0.0.1
remote IP address 10.1.1.2
Script /etc/ppp/ip-up started (pid 472)
Script /etc/ppp/ip-up finished (pid 472), status = 0x0
rcvd [LCP EchoReq id=0x1 magic=0x60cdd1c1]
sent [LCP EchoRep id=0x1 magic=0x8ce4c59]
sent [LCP EchoReq id=0x1 magic=0x8ce4c59]
rcvd [LCP EchoRep id=0x1 magic=0x60cdd1c1]
rcvd [LCP EchoReq id=0x2 magic=0x60cdd1c1]
sent [LCP EchoRep id=0x2 magic=0x8ce4c59]

-----> Client 2 side

root@xxxxxxx./btd_silex -i 0 -r
client -600 
Bluetooth Control Application
-----------------------------
Running as client
Serdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Opening dev /dev/ttyS0
Initiating physical driver
Registered bluetooth line discipline on /dev/ttyS0
Opening dev /dev/ttyBT0
Init stack
Modem emulation set to 0
No hw init done
Now entering cmd line mode

Menu
------------------------
  inq (inquiry scan)
  con <xx:xx:xx:xx:xx:xx> <profile>
  disc <handle>
  send <nbr bytes> <nbr repeats>
  me <1/0>
  setbd <xx:xx:xx:xx:xx:xx>
  readbd
  reset
  ppp
  quit
> readbd
Current bd addr : 00:50:CD:00:06:40
> con 00:50:CD:00:06:41 0
Connecting to bd: 00:50:CD:00:06:41
using profile: 0
-> connect_profile
Stack returned handle 0
connect done
> ppp
close_device
Starting ppp client on /dev/ttyBT0
Spawned pppd[2978] in the background.
Using interface ppp0
Connect: ppp0 <--> /dev/ttyBT0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x60cdd1c1> <pcomp>
<accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x60cdd1c1> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x8ce4c59> <pcomp>
<accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x8ce4c59> <pcomp>
<accomp>]
sent [LCP EchoReq id=0x0 magic=0x60cdd1c1]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoReq id=0x0 magic=0x8ce4c59]
sent [LCP EchoRep id=0x0 magic=0x60cdd1c1]
rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x1 <addr 10.0.0.1>]
rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoRep id=0x0 magic=0x8ce4c59]
rcvd [IPCP ConfNak id=0x1 <addr 10.1.1.2>]
sent [IPCP ConfReq id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
rcvd [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Deflate (15) compression enabled
rcvd [IPCP ConfReq id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
sent [IPCP ConfAck id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
rcvd [IPCP ConfAck id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
not replacing existing default route to eth0 [138.131.170.10]
local  IP address 10.1.1.2
remote IP address 10.0.0.1
Script /etc/ppp/ip-up started (pid 2980)
Script /etc/ppp/ip-up finished (pid 2980), status = 0x0
sent [LCP EchoReq id=0x1 magic=0x60cdd1c1]
rcvd [LCP EchoRep id=0x1 magic=0x8ce4c59]
rcvd [LCP EchoReq id=0x1 magic=0x8ce4c59]
sent [LCP EchoRep id=0x1 magic=0x60cdd1c1]
sent [LCP EchoReq id=0x2 magic=0x60cdd1c1]
rcvd [LCP EchoRep id=0x2 magic=0x8ce4c59]



********************************** 20010108
**********************************

-----> Client 1 side

root@bellevue:/home/bpe/bluetooth/axis/20010108/apps/btd >
./btd_bellevue -i 0 -r client -s 9600
Bluetooth Control Application
-----------------------------
Running as client
Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Registered bluetooth line discipline on /dev/ttyS0
Init stack
Setting write_scan_enable in Ericsson module!
Setting baudrate in Ericsson module!
Now entering cmd line mode

Menu
------------------------
  inq (inquiry scan)
  rf_conn <xx:xx:xx:xx:xx:xx> <srv ch> <line>
  rf_send <nbr bytes> <nbr repeats> <line>
  rf_disc <line>
  rf_wait <line>
  me <1/0>
  setbd <xx:xx:xx:xx:xx:xx>
  readbd
  reset
  ppp
  inqscan
  quit
> readbd
^HCurrent bd addr : 00:00:00:00:00:00
> readbd
Current bd addr : 00:50:CD:00:06:41
> inqscan
Setting write_scan_enable in Digianswer router
> 

-----> Client 2 side

root@xxxxxxx./btd_silex -i 0
-r cnt -s 9600
Bluetooth Control Application
-----------------------------
Running as client
Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Registered bluetooth line discipline on /dev/ttyS0
Init stack
Setting write_scan_enable in Ericsson module!
Setting baudrate in Ericsson module!
Now entering cmd line mode

Menu
------------------------
  inq (inquiry scan)
  rf_conn <xx:xx:xx:xx:xx:xx> <srv ch> <line>
  rf_send <nbr bytes> <nbr repeats> <line>
  rf_disc <line>
  rf_wait <line>
  me <1/0>
  setbd <xx:xx:xx:xx:xx:xx>
  readbd
  reset
  ppp
  inqscan
  quit
> readbd
Current bd addr : 00:00:00:00:00:00
> readbd
Current bd addr : 00:50:CD:00:06:40
> rf_conn 00:50:CD:00:06:41 0 0


*********************************   TRACE B 
*********************************
********************************** 20000814
**********************************

-----> HCI trace of the master (initiates the call)

INITIALISATION
--------------
Rx: 0E 0A 01 09 10 00 40 06 00 CD 50 00 
Tx: 09 10 00 
Rx: 0E 04 01 0F FC 01 
Tx: 0F FC 00 
Rx: 0E 0B 01 05 10 00 53 01 1E 02 00 02 00 
Tx: 05 10 00 
Rx: FF 01 FF 
Tx: 03 0C 00

READBD
------
Rx: 0E 0A 01 09 10 00 40 06 00 CD 50 00 
Tx: 09 10 00

CON 00:50:CD:00:06:41 0
-----------------------
Rx: 1D 05 00 00 00 18 CC 
Tx: 0F 04 04 00 00 18 CC 
Rx: 03 0B 00 00 00 41 06 00 CD 50 00 01 00 
Rx: 0F 04 00 01 05 04 
Tx: 05 04 0D 41 06 00 CD 50 00 18 CC 00 00 00 00 00
 
-----> HCI trace of the slave (reply to the call)

INITIALISATION
--------------
Rx: 0E 0A 01 09 10 00 41 06 00 CD 50 00 
Tx: 09 10 00 
Rx: 0E 04 01 0F FC 01 
Tx: 0F FC 00 
Rx: 0E 0B 01 05 10 00 53 01 1E 02 00 02 00 
Tx: 05 10 00 
Rx: FF 01 FF 
Tx: 03 0C 00

READBD
------
Rx: 0E 0A 01 09 10 00 41 06 00 CD 50 00 
Tx: 09 10 00

INQSCAN
-------
Rx: 0E 04 01 1A 0C 00 
Tx: 1A 0C 01 03

Rx: 1D 05 00 00 00 18 CC 
Tx: 0F 04 04 00 00 18 CC 
Rx: 1B 03 00 00 05 
Rx: 03 0B 00 00 00 40 06 00 CD 50 00 01 00 
Rx: 0F 04 00 01 09 04 
Tx: 09 04 07 40 06 00 CD 50 00 01 
Rx: 04 0A 40 06 00 CD 50 00 00 00 00 01 


********************************** 20010108
**********************************

-----> HCI trace of the master (initiates the call)

INITIALISATION
--------------

READBD
------
Rx: 0E 0A 01 09 10 00 40 06 00 CD 50 00 
Tx: 09 10 00 
Rx: 0E 0A 01 09 10 00 40 06 00 CD 50 00 
Tx: 09 10 00


RF_CONN 00:50:CD:00:06:41 0 0
-----------------------------
Rx: 1D 05 00 00 00 00 CC 
Tx: 0F 04 04 00 00 00 CC 
Rx: 03 0B 00 00 00 41 06 00 CD 50 00 01 00 
Rx: 0F 04 00 01 05 04 
Tx: 05 04 0D 41 06 00 CD 50 00 18 CC 00 00 00 00 00
 
-----> HCI trace of the slave (reply to the call)

INITIALISATION
--------------

READBD
------
Rx: 0E 0A 01 09 10 00 41 06 00 CD 50 00 
Tx: 09 10 00 
Rx: 0E 0A 01 09 10 00 41 06 00 CD 50 00 
Tx: 09 10 00

INQSCAN
-------
Rx: 0E 04 01 1A 0C 00 
Tx: 1A 0C 01 03

Rx: 1D 05 00 00 00 00 CC 
Tx: 0F 04 04 00 00 00 CC 
Rx: 1B 03 00 00 05 
Rx: 03 0B 00 00 00 40 06 00 CD 50 00 01 00 
Rx: 0F 04 00 01 09 04 
Tx: 09 04 07 40 06 00 CD 50 00 01 
Rx: 04 0A 40 06 00 CD 50 00 00 00 00 01


*********************************   TRACE C 
*********************************
********************************** EMULATION
*********************************
********************************** 20000814
**********************************
-----> Server side

root@xxxxxxx./btd_bellevue -s
9600
Bluetooth Control Application
-----------------------------
Running as server
Serdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Opening dev /dev/ttyS0
Initiating physical driver
Initializing ericsson HW
Registered bluetooth line discipline on /dev/ttyS0
Opening dev /dev/ttyBT0
Init stack
Modem emulation set to 0
Setting write_scan_enable in Ericsson module!
Setting baudrate in Ericsson module!
close_device
Starting ppp server on /dev/ttyBT0
Spawned pppd[284] in the background.
Using interface ppp0
Connect: ppp0 <--> /dev/ttyBT0
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xebe3a1e6> <pcomp>
<accomp>]
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xafa43091> <pcomp>
<accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xebe3a1e6> <pcomp>
<accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xafa43091> <pcomp>
<accomp>]
sent [LCP EchoReq id=0x0 magic=0xafa43091]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoReq id=0x0 magic=0xebe3a1e6]
sent [LCP EchoRep id=0x0 magic=0xafa43091]
rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x1 <addr 10.1.1.2>]
rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoRep id=0x0 magic=0xebe3a1e6]
rcvd [IPCP ConfNak id=0x1 <addr 10.0.0.1>]
sent [IPCP ConfReq id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
rcvd [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Deflate (15) compression enabled
rcvd [IPCP ConfReq id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
sent [IPCP ConfAck id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
rcvd [IPCP ConfAck id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
Cannot determine ethernet address for proxy ARP
local  IP address 10.0.0.1
remote IP address 10.1.1.2
Script /etc/ppp/ip-up started (pid 289)
Script /etc/ppp/ip-up finished (pid 289), status = 0x0


-----> Client side

root@xxxxxxx./btd_silex -r client
-s 9600
Bluetooth Control Application
-----------------------------
Running as client
Serdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Opening dev /dev/ttyS0
Initiating physical driver
Initializing ericsson HW
Registered bluetooth line discipline on /dev/ttyS0
Opening dev /dev/ttyBT0
Init stack
Modem emulation set to 0
Setting write_scan_enable in Ericsson module!
Setting baudrate in Ericsson module!
Now entering cmd line mode

Menu
------------------------
  inq (inquiry scan)
  con <xx:xx:xx:xx:xx:xx> <profile>
  disc <handle>
  send <nbr bytes> <nbr repeats>
  me <1/0>
  setbd <xx:xx:xx:xx:xx:xx>
  readbd
  reset
  ppp
  quit
> con 11:22:33:44:55:66 0
Connecting to bd: 11:22:33:44:55:66
using profile: 0
-> connect_profile
Stack returned handle 0
connect done
> ppp
close_device
Starting ppp client on /dev/ttyBT0
Spawned pppd[2897] in the background.
Using interface ppp0
Connect: ppp0 <--> /dev/ttyBT0
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xebe3a1e6> <pcomp>
<accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0xafa43091> <pcomp>
<accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xafa43091> <pcomp>
<accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0xebe3a1e6> <pcomp>
<accomp>]
sent [LCP EchoReq id=0x0 magic=0xebe3a1e6]
sent [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoReq id=0x0 magic=0xafa43091]
sent [LCP EchoRep id=0x0 magic=0xebe3a1e6]
rcvd [IPCP ConfReq id=0x1 <addr 0.0.0.0> <compress VJ 0f 01>]
sent [IPCP ConfNak id=0x1 <addr 10.0.0.1>]
rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [LCP EchoRep id=0x0 magic=0xafa43091]
rcvd [IPCP ConfNak id=0x1 <addr 10.1.1.2>]
sent [IPCP ConfReq id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
rcvd [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Deflate (15) compression enabled
rcvd [IPCP ConfReq id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
sent [IPCP ConfAck id=0x2 <addr 10.0.0.1> <compress VJ 0f 01>]
rcvd [IPCP ConfAck id=0x2 <addr 10.1.1.2> <compress VJ 0f 01>]
not replacing existing default route to eth0 [138.131.170.10]
local  IP address 10.1.1.2
remote IP address 10.0.0.1
Script /etc/ppp/ip-up started (pid 2899)
Script /etc/ppp/ip-up finished (pid 2899), status = 0x0
sent [LCP EchoReq id=0x1 magic=0xebe3a1e6]
rcvd [LCP EchoReq id=0x1 magic=0xafa43091]
sent [LCP EchoRep id=0x1 magic=0xebe3a1e6]
rcvd [LCP EchoRep id=0x1 magic=0xafa43091]

********************************** 20010108
**********************************

-----> Server side

root@bellevue:/home/bpe/bluetooth/axis/20010108/apps/btd >
./btd_bellevue -s 9600
Bluetooth Control Application
-----------------------------
Running as server
Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Registered bluetooth line discipline on /dev/ttyS0
Init stack
Setting write_scan_enable in Ericsson module!
Setting baudrate in Ericsson module!


-----> Client side

root@xxxxxxx./btd_silex -r
client  9600
Bluetooth Control Application
-----------------------------
Running as client
Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 9600 baud
Registered bluetooth line discipline on /dev/ttyS0
Init stack
Setting write_scan_enable in Ericsson module!
Setting baudrate in Ericsson module!
Now entering cmd line mode

Menu
------------------------
  inq (inquiry scan)
  rf_conn <xx:xx:xx:xx:xx:xx> <srv ch> <line>
  rf_send <nbr bytes> <nbr repeats> <line>
  rf_disc <line>
  rf_wait <line>
  me <1/0>
  setbd <xx:xx:xx:xx:xx:xx>
  readbd
  reset
  ppp
  inqscan
  quit
> rf_conn 11:22:33:44:55:66 0 0
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com