[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] HOWTO PPP Connect over BlueTooth



    I followed Carlos', instructions and the only part which I can't
replicate is the "conn BD_ADDR 0" command. I must specifiy a line as well.

    rf_conn BD_ADDR 0 0
    (I do connect to the other Ericsson module)

    when I do this and enter the command "ppp" I get a stream of messages
stating that "Line 0 is Already Connected". Looking into the log I see that
PPP was started but stopped.

    Using Jan8,2001 how do I simply connect the client and server without
specifying a line? Or does this version not support PPP profiles?

    Any help would be very much appreciated..  ThankYou

    JohnK

----- Original Message -----
From: "Gordon McNutt" <gmcnutt@xxxxxxx.com>
To: "John Kiss" <jkiss@xxxxxxx.com>
Cc: <bluetooth-dev@xxxxxxx.com>
Sent: Tuesday, January 30, 2001 10:32 PM
Subject: Re: [bluetooth-dev] HOWTO PPP Connect over BlueTooth


> John Kiss wrote:
>
> >     okay, okay, how do you do it?? I've tried trial by error and I
> > went through this mailing list's achive database and can't find anyone
> > else who is having this problem.  So I've come to the conclusion that
> > I'm the only moron that can't figure this out.. =)     What I have...
> > 2 Ericsson BTM running P9 firmware and UART connections to 2 PC's
> > running Redhat 6.2. I can connect the two modules together using the
> > btd interface and do an inquiries. Here is my /etc/ppp/options.ttyBT0
> > on the server side:
> >     noauth nodeflate nobsdcom plock
> >     mtu 256
> >     debug
> >     local
> >     silent
> >     192.168.1.6:192.168.1.100
> >
> > /etc/ppp/options.ttyBT0 on the client side:
> >     noauth nodeflate nobsdcom plock
> >     mtu 256
> >     debug
> >     local
> >
> > I run btd as on both sides.
> >      btd -u /dev/ttyS0 -s 57600 -m -e 0I select the option "ppp", for
> > client and server, from the menu. I have done a lot more failed
> > attempts, eg, switching to another console and starting "pppd
> > /dev/ttyBT0". Any help would be very much appreciated..  Thank
> > YouJohnK
>
> How about an error description? Do you see any PPP traffic at all?
>
> --gmcnutt
>
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
in
> the body of a message to majordomo@xxxxxxx.com

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com