[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] rfcomm connection






Gordon,
I should add that I've commented out switch_role in
process_event(event=CONNECTION_COMPLETE) because AFAIK ericsson doesn't support
role switch. (if uncommented, I get unkown hci command).
mandana
p.s.: sorry for the long msg.

server side
*******************************************************************************************
HCI: <CC>
HCI: , MANUFACTURER_SPEC
BT SYS: Ericsson baudrate set
HCI: , Num_HCI_Command_Packets=1
HCI: , start: Num_HCI_Command_Packets=1
BT DATA -->|X|      8  data rec :  (8)   0x04 0x04 0x0a 0xe7 0x4b 0x03 0xb7 0xd0
BT DATA -->|X|      5  data rec :  (5)   0x00 0x00 0x03 0x02 0x01
&tgr;K?

? (10)
   0xe7 0x4b 0x03 0xb7 0xd0 0x00 0x00 0x03 0x02 0x01
HCI: , CONNECTION_REQUEST
lp_connect_ind from : (6)
   0xe7 0x4b 0x03 0xb7 0xd0 0x00
    L2CAP lp_connect_ind: Accepting connection
    L2CAP l2cap_create_con
l2cap_create_con : bd  (6)
   0xe7 0x4b 0x03 0xb7 0xd0 0x00
    L2CAP get_lcon : lcid 64 con_list.count = 0
    L2CAP get_lcon : connection lcid : 64 not found
    L2CAP Create_con rcid 0
    L2CAP init_flow
show_con : insert_con() (64:0) [CLOSED] [unknown] r_mtu[672] C[no] link_up[yes]
    L2CAP insert_con : now 1 connections
HCI: Status:1
HCI: , bd_addr e7 4b 3 b7 d0 0
HCI: , start: Num_HCI_Command_Packets=1
BT DATA <--|X|     11
bt_write_lower_driver  (11)
   0x01 0x09 0x04 0x07 0xe7 0x4b 0x03 0xb7 0xd0 0x00 0x01
HCI: , sent data..., freeing memory
BT DATA -->|X|      7  data rec :  (7)  0x04 0x0f 0x04 0x00 0x01 0x09 0x04
 (4)   0x00 0x01 0x09 0x04
HCI: , COMMAND_STATUS
HCI: , Num_HCI_Command_Packets=1
HCI: , start: Num_HCI_Command_Packets=1
BT DATA -->|X|      8  data rec :  (8) 0x04 0x03 0x0b 0x00 0x01 0x00 0xe7 0x4b
BT DATA -->|X|      6  data rec :  (6)   0x03 0xb7 0xd0 0x00 0x01 0x00
 (11)   0x00 0x01 0x00 0xe7 0x4b 0x03 0xb7 0xd0 0x00 0x01 0x00
HCI: , CONNECTION_COMPLETE: Success!
    L2CAP lp_connect_cfm: Success! (hci_handle : 1)
    L2CAP get_con : look for connections in state CLOSED (0)
get_con : bd  (6)
   0xe7 0x4b 0x03 0xb7 0xd0 0x00
get_con : con_list bd  (6)
   0xe7 0x4b 0x03 0xb7 0xd0 0x00
    L2CAP we are server
BT SYS: , ACL link is up
HCI: , for connnection handle 0x1
HCI: , start: Num_HCI_Command_Packets=1
BT DATA <--|X|      8
bt_write_lower_driver  (8)
   0x01 0x0f 0x04 0x04 0x01 0x00 0x00 0xcc
HCI: , sent data..., freeing memory
BT DATA -->|X|      7  data rec :  (7)   0x04 0x0f 0x04 0x00 0x00 0x0f 0x04
 (4)   0x00 0x00 0x0f 0x04
HCI: , COMMAND_STATUS
HCI: , Num_HCI_Command_Packets=0
HCI: , start: Num_HCI_Command_Packets=0
BT DATA -->|X|      8  data rec :  (8)   0x04 0x1d 0x05 0x00 0x01 0x00 0x00 0xcc
 (5)   0x00 0x01 0x00 0x00 0xcc
HCI: , CHANGE_CONNECTION_PACKET_TYPE
BT DATA -->|X|     13  data rec :  (13)   0x04 0x0e 0x04 0x01 0x00 0x00 0x00
0x04 0x1b 0x03 0x01 0x00 0x03

(4)   0x01 0x00 0x00 0x00
HCI: , COMMAND_COMPLETE
HCI: <CC>
HCI: , ogf 0, not recognised!
HCI: , Num_HCI_Command_Packets=1
HCI: , start: Num_HCI_Command_Packets=1
? (3)
   0x01 0x00 0x03
HCI: , MAX_SLOTS_CHANGE to 3
BT DATA -->|X|      7  data rec :  (7)   0x04 0x05 0x04 0x00 0x01 0x00 0x14
 (4)   0x00 0x01 0x00 0x14
BT SYS: , DISCONNECTION_COMPLETE Other End Terminated Connection: Low Resources
BT SYS: lp_disconnect_ind : Connection handle 1 disconnected
----------- show_list count :1 -----------
show_con :  -  (64:0) [CLOSED] [unknown] r_mtu[672] C[no] link_up[yes]
-------------------------------------------


    L2CAP get_con_hcihdl : hdl 1
    L2CAP l2cap connection (64:0) found on handle 1
    L2CAP now closing it...
    L2CAP Current state of (64:0) is CLOSED
    L2CAP connection closed, remove it!
show_con : delete_con :  (64:0) [CLOSED] [unknown] r_mtu[672] C[no] link_up[no]
    L2CAP Now connection list is empty !
    L2CAP get_con_hcihdl : hdl 1
    L2CAP get_con_hcihdl : no more connections on this handle
    L2CAP lp_disconnect_ind : no more l2cap cons on this handle
    BTMEM btmem_flushhandle
HCI:
HCI: , WRAP
HCI: , start: Num_HCI_Command_Packets=1
HCI: , next_to_send WRAP
BT DATA <--|X|      4
bt_write_lower_driver  (4)
   0x01 0x05 0x10 0x00
HCI: , sent data..., freeing memory
BT DATA -->|X|      8  data rec :  (8)
   0x04 0x0e 0x0b 0x01 0x05 0x10 0x00 0x20
, hci-8
BT DATA -->|X|      6  data rec :  (6)
   0x03 0x00 0x0a 0x00 0x00 0x00
, hci-6
??
 (11)
   0x01 0x05 0x10 0x00 0x20 0x03 0x00 0x0a 0x00 0x00 0x00
HCI: , COMMAND_COMPLETE
HCI: <CC>
HCI: , READ_BUFFER_SIZE

HW module contains...
10 ACL buffers at 800 bytes
0 SCO buffers at 0 bytes

HCI: , Num_HCI_Command_Packets=1
HCI: , start: Num_HCI_Command_Packets=1

client side
*******************************************************************************************

BT DATA -->|X|      7  data rec :  (7)   0x04 0x0e 0x04 0x01 0x09 0xfc 0x00

?       n (4)   0x01 0x09 0xfc 0x00
HCI: , COMMAND_COMPLETE
HCI: <CC>
HCI: , MANUFACTURER_SPEC
BT SYS: Ericsson baudrate set
HCI: , Num_HCI_Command_Packets=1
HCI: , start: Num_HCI_Command_Packets=1
rf_conn 00:d0:b7:03:4a:0d 1 0
Command Entered: rf_conn 00:d0:b7:03:4a:0d 1 0
Connecting srv ch 1 on line 0
          RFCOMM rfcomm_connect_req: server channel:1, line:0
we don't have l2cap ch yet for this rfcomm ch
    L2CAP l2cap_connect_req
l2ca_connect_req : sent to bd  (6)
   0x00 0xd0 0xb7 0x03 0x4a 0x0d
    L2CAP get_con : look for connections in state ANY_STATE (7)
get_con : bd  (6)
   0x0d 0x4a 0x03 0xb7 0xd0 0x00
    L2CAP get_con : connection not found
    L2CAP get_lcon : lcid 64 con_list.count = 0
    L2CAP get_lcon : connection lcid : 64 not found
    L2CAP Create_con rcid 0
    L2CAP init_flow
bd (6)
   0x0d 0x4a 0x03 0xb7 0xd0 0x00
show_con : insert_con() (64:0) [CLOSED] [RFCOMM] r_mtu[672] C[yes] link_up[no]
    L2CAP insert_con : now 1 connections
    L2CAP l2ca_connect_req : create new baseband link
, bd addres is: (6)
   0x0d 0x4a 0x03 0xb7 0xd0 0x00
HCI:
HCI: , start: Num_HCI_Command_Packets=1
BT DATA <--|X|     17
bt_write_lower_driver  (17)
   0x01 0x05 0x04 0x0d 0x0d 0x4a 0x03 0xb7 0xd0 0x00 0x18 0xcc 0x00 0x00 0x00
0x00
   0x00
HCI: , sent data..., freeing memory
BT DATA -->|X|      7  data rec :  (7)   0x04 0x0f 0x04 0x00 0x01 0x05 0x04
 (4)   0x00 0x01 0x05 0x04
HCI: , COMMAND_STATUS
HCI: , Num_HCI_Command_Packets=1
HCI: , start: Num_HCI_Command_Packets=1
BT DATA -->|X|      8  data rec :  (8)
   0x04 0x03 0x0b 0x00 0x01 0x00 0x0d 0x4a
, hci-8
BT DATA -->|X|      6  data rec :  (6)   0x03 0xb7 0xd0 0x00 0x01 0x00
 (11)   0x00 0x01 0x00 0x0d 0x4a 0x03 0xb7 0xd0 0x00 0x01 0x00
HCI: , CONNECTION_COMPLETE: Success!
     L2CAP lp_connect_cfm: Success! (hci_handle : 1)
    L2CAP get_con : look for connections in state CLOSED (0)
get_con : bd  (6)   0x0d 0x4a 0x03 0xb7 0xd0 0x00
get_con : con_list bd  (6)   0x0d 0x4a 0x03 0xb7 0xd0 0x00
    L2CAP we are client
lp_connect_cfm : HCI connected to  (6)
   0x0d 0x4a 0x03 0xb7 0xd0 0x00
    L2CAP Current state of (64:0) is W4_L2CAP_CONNECT_RSP
    L2CAP l2cap_connect_req: Connecting RFCOMM (rcid:0)
    BTMEM subscribe_bt_buf : buf_len 53
    BTMEM get_bt_buf : no data in buffer
    BTMEM Buffer empty, reset buffer and subsc at 0
 use NO timer...
HCI: , 24 bytes
    BTMEM get_bt_buf : returning 5696468
HCI: , 24 bytes
HCI: , send 24 bytes (excl HCI header) out of 24
HCI: , There are 5 bytes space for the headers
,  (29)
   0x02 0x01 0x20 0x18 0x00 0x10 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x02 0x01
0x00
   0x00 0x08 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x40 0x00 0x00 0x00
BT DATA <--|X|     29
bt_write_lower_driver  (29)
   0x02 0x01 0x20 0x18 0x00 0x10 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x02 0x01
0x00
   0x00 0x08 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x40 0x00 0x00 0x00
HCI: , now c = 24
HCI: , unsubscribing tx_buf.
    BTMEM unsubscribe_bt_buf : 29 bytes (not incl hdrs) at pos 0
HCI: <--0 (9)
    BTMEM get_bt_buf : no data in buffer
BT SYS: , ACL link is up
HCI: , for connnection handle 0x1
HCI: , start: Num_HCI_Command_Packets=1
BT DATA <--|X|      8
bt_write_lower_driver  (8)
   0x01 0x0f 0x04 0x04 0x01 0x00 0x00 0xcc
HCI: , sent data..., freeing memory
BT DATA -->|X|      7  data rec :  (7)   0x04 0x0f 0x04 0x00 0x00 0x0f 0x04
 (4)   0x00 0x00 0x0f 0x04
HCI: , COMMAND_STATUS
HCI: , Num_HCI_Command_Packets=0
HCI: , start: Num_HCI_Command_Packets=0
BT DATA -->|X|     15  data rec :  (15)   0x04 0x1d 0x05 0x00 0x01 0x00 0x00
0xcc 0x04 0x0e 0x04 0x01 0x00 0x00 0x00
 (5)   0x00 0x01 0x00 0x00 0xcc
HCI: , CHANGE_CONNECTION_PACKET_TYPE
? (4)   0x01 0x00 0x00 0x00
HCI: , COMMAND_COMPLETE
HCI: <CC>
HCI: , ogf 0, not recognised!
HCI: , Num_HCI_Command_Packets=1
HCI: , start: Num_HCI_Command_Packets=1
rf_send 20 10 2
Command Entered: rf_send 20 10 2

Now sending 10 20-bytes packet (0 kB)
BT DATA    |X|<--  20 [0]
rfcomm_send_data:  (20)
   0x41 0x42 0x43 0x44 0x45 0x46 0x47 0x48 0x49 0x4a 0x4b 0x4c 0x4d 0x4e 0x4f
0x50
   0x51 0x52 0x53 0x54
BT SYS: ERROR :rfcomm_send_data: DLCI 2 not connected
error
couldn't write any more data...


done.
Average TX rate : 0 kbps (0 kB/s)
bb_disc 1
Command Entered: bb_disc 1
Disconnecting hci handle 1
HCI:
HCI: , WRAP
HCI: , start: Num_HCI_Command_Packets=1
HCI: , next_to_send WRAP
BT DATA <--|X|      7
bt_write_lower_driver  (7)
   0x01 0x06 0x04 0x03 0x01 0x00 0x14
HCI: , sent data..., freeing memory
BT DATA -->|X|      7  data rec :  (7)   0x04 0x0f 0x04 0x00 0x00 0x06 0x04
(4)   0x00 0x00 0x06 0x04
HCI: , COMMAND_STATUS
HCI: , Num_HCI_Command_Packets=0
HCI: , start: Num_HCI_Command_Packets=0
BT DATA -->|X|     14  data rec :  (14)
   0x04 0x05 0x04 0x00 0x01 0x00 0x16 0x04 0x0e 0x04 0x01 0x00 0x00 0x00
 (4)   0x00 0x01 0x00 0x16
BT SYS: , DISCONNECTION_COMPLETE Connection Terminated by Local Host
BT SYS: lp_disconnect_ind : Connection handle 1 disconnected
----------- show_list count :1 -----------
show_con :  -  (64:0) [W4_L2CAP_CONNECT_RSP] [RFCOMM] r_mtu[672] C[yes]
link_up[yes]
-------------------------------------------


    L2CAP get_con_hcihdl : hdl 1
    L2CAP l2cap connection (64:0) found on handle 1
    L2CAP now closing it...
    L2CAP Current state of (64:0) is W4_L2CAP_CONNECT_RSP
BT SYS: closing l2cap con (64,0)
    L2CAP get_upper: Try to retrieve psm 0x3
    L2CAP get_upper: Actually got psm:0x3
          RFCOMM rfcomm_disconnect_ind: remote cid 0
    L2CAP l2ca_disconnect_rsp
show_con : disconnecting :  (64:0) [W4_L2CA_DISCONNECT_RSP] [RFCOMM] r_mtu[672]
C[yes] lin
k_up[no]
    L2CAP baseband link down, cannot send rsp
    L2CAP Current state of (64:0) is CLOSED
BT SYS: l2cap channel (64,0) [RFCOMM] disconnected
    L2CAP count_con : 1 l2cap_con's found with hci_hdl:1





Gordon McNutt <gmcnutt@xxxxxxx.com> on 02/13/2001 03:48:33 PM
                                                              
                                                              
                                                              
 To:      Mandana Amiri/Inc/Celestica@Celestica               
                                                              
 cc:      bluetooth-dev@xxxxxxx.com                              
                                                              
                                                              
                                                              
 Subject: Re: [bluetooth-dev] rfcomm connection               
                                                              

Mandana Amiri wrote:

> Hi again,
> I'm not sure if my email made it through yesterday. any suggestions for my
> problem described below?
>
> THanks,
> mandana
> ---------------------- Forwarded by Mandana Amiri/Inc/Celestica on 02/13/2001
> 10:33 AM ---------------------------
>
> "Mandana Amiri" <mamiri@xxxxxxx.com> on 02/12/2001 06:20:06 PM
>
>
>
>  To:      bluetooth-dev@xxxxxxx.com
>
>  cc:      (bcc: Mandana Amiri/Inc/Celestica)
>
>
>
>  Subject: [bluetooth-dev] rfcomm connection
>
>
> Hi,
> I can't get rfcomm connection to work. I've modified the stack because of a
> special setup that I have and I'm running it in usermode. (I know that user
mode
> is not proven and sends data on dlci 2 only).
> I can get other things to work, like inquiry and read_bd. I type rf_conn
> 00:d0:b7:03:4b:e7 1 0
> and then rf_send 15 100 2
>
> Here is the dump for the client side, I wonder if someone can give me a clue
of
> when things go wrong:
> Thanks,
>
> rf_conn 00:d0:b7:03:4a:0d 1 0
> Command Entered: rf_conn 00:d0:b7:03:4a:0d 1 0
> Connecting srv ch 1 on line 0
> we don't have l2cap ch yet for this rfcomm ch
>     L2CAP l2cap_connect_req
> l2ca_connect_req : sent to bd  (6)
>    0x00 0xd0 0xb7 0x03 0x4a 0x0d
>     L2CAP get_con : look for connections in state ANY_STATE (7)
> get_con : bd  (6)
>    0x0d 0x4a 0x03 0xb7 0xd0 0x00
>     L2CAP get_con : connection not found
>     L2CAP get_lcon : lcid 64 con_list.count = 0
>     L2CAP get_lcon : connection lcid : 64 not found
>     L2CAP Create_con rcid 0
>     L2CAP init_flow
> bd (6)
>    0x0d 0x4a 0x03 0xb7 0xd0 0x00
> show_con : insert_con() (64:0) [CLOSED] [RFCOMM] r_mtu[672] C[yes] link_up[no]
>     L2CAP insert_con : now 1 connections
>     L2CAP l2ca_connect_req : create new baseband link
> , bd addres is: (6)
>    0x0d 0x4a 0x03 0xb7 0xd0 0x00
> HCI: , start: Num_HCI_Command_Packets=1
> BT DATA <--|X|     17
> bt_write_lower_driver  (17)
>    0x01 0x05 0x04 0x0d 0x0d 0x4a 0x03 0xb7 0xd0 0x00 0x18 0xcc 0x00 0x00 0x00
0x
>    0x00
> BT DATA -->|X|      7  data rec :  (7)
>    0x04 0x0f 0x04 0x00 0x01 0x05 0x04
> , hci-7
>  (4)
>    0x00 0x01 0x05 0x04
> HCI: , Num_HCI_Command_Packets=1
> HCI: , start: Num_HCI_Command_Packets=1
> BT DATA -->|X|      8  data rec :  (8)
>    0x04 0x03 0x0b 0x00 0x01 0x00 0x0d 0x4a
> , hci-8
> BT DATA -->|X|      6  data rec :  (6)
>    0x03 0xb7 0xd0 0x00 0x01 0x00
> , hci-6
>  (11)
>    0x00 0x01 0x00 0x0d 0x4a 0x03 0xb7 0xd0 0x00 0x01 0x00
>     L2CAP lp_connectg: Success! (hci_handle : 1)
>     L2CAP get_con : look for connections in state CLOSED (0)
> get_con : bd  (6)
>    0x0d 0x4a 0x03 0xb7 0xd0 0x00
> get_con : con_list bd  (6)
>    0x0d 0x4a 0x03 0xb7 0xd0 0x00
>     L2CAP we are client
> lp_connect_cfm : HCI connected to  (6)
>    0x0d 0x4a 0x03 0xb7 0xd0 0x00
>     L2CAP Current state of (64:0) is W4_L2CAP_CONNECT_RSP
>     L2CAP l2cap_connect_req: Connecting RFCOMM (rcid:0)
> use NO timer...
> HCI: , 24 bytes
> HCI: , 24 bytes
> HCI: , send 24 bytes (excl HCI header) out of 24
> HCI: , There are 5 bytes space for the headers
> ,  (29)
>    0x02 0x01 0x20 0x18 0x00 0x10 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x02 0x01
0x
>    0x00 0x08 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x40 0x00 0x00 0x00
> BT DATA <--|X|     29
> bt_write_lower_driver  (29)
>    0x02 0x01 0x20 0x18 0x00 0x10 0x00 0x01 0x00 0x00 0x00 0x00 0x00 0x02 0x01
0x
>    0x00 0x08 0x00 0x00 0x00 0x03 0x00 0x00 0x00 0x40 0x00 0x00 0x00
> HCI: , now c = 24
> HCI: , unsubscribing tx_buf.
> BT SYS: , ACL link is up
> HCI: , WRAP
> HCI: , start: Num_HCI_Command_Packets=1
> HCI: , next_to_send WRAP
> BT DATA <--|X|      8
> bt_write_lower_driver  (8)
>    0x01 0x0f 0x04 0x04 0x01 0x00 0x00 0xcc
> HCI: , start: Num_HCI_Command_Packets=0
> BT DATA -->|X|      7  data rec :  (7)
>    0x04 0x0f 0x04 0x00 0x00 0x0f 0x04
> , hci-7
>  (4)
>    0x00 0x00 0x0f 0x04
> HCI: , Num_HCI_Command_Packets=0
> HCI: , start: Num_HCI_Command_Packets=0
> BT DATA -->|X|     15  data rec :  (15)
>    0x04 0x1d 0x05 0x00 0x01 0x00 0x00 0xcc 0x04 0x0e 0x04 0x01 0x00 0x00 0x00
> , hci-15
>  (5)
>    0x00 0x01 0x00 0x00 0xcc
> ? (4)
>    0x01 0x00 0x00 0x00
> HCI: , Num_HCI_Command_Packets=1
> HCI: , start: Num_HCI_Command_Packets=1
> BT DATA <--|X|     14
> bt_write_lower_driver  (14)
>    0x01 0x19 0x04 0x0a 0x0d 0x4a 0x03 0xb7 0xd0 0x00 0x00 0x00 0x00 0x00
> BT DATA -->|X|      7  data rec :  (7)
>    0x04 0x0f 0x04 0x00 0x01 0x19 0x04
> , hci-7
>  (4)
>    0x00 0x01 0x19 0x04
> HCI: , Num_HCI_Command_Packets=1
> HCI: , start: Num_HCI_Command_Packets=1
> BT DATA -->|X|      8  data rec :  (8)
>    0x04 0x07 0xff 0x00 0x0d 0x4a 0x03 0xb7
> , hci-8
> BT DATA -->|X|     14  data rec :  (14)
>    0xd0 0x00 0x62 0x6c 0x75 0x65 0x5f 0x6b 0x69 0x6e 0x67 0x00 0x00 0x00
> , hci-14
> BT DATA -->|X|     47  data rec :  (47)
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> , hci-47
> BT DATA -->|X|     95  data rec :  (95)
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> , hci-95
> BT DATA -->|X|     94  data rec :  (94)
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
> , hci-94
>  (255)
>    0x00 0x0d 0x4a 0x03 0xb7 0xd0 0x00 0x62 0x6c 0x75 0x65 0x5f 0x6b 0x69 0x6e
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x
>    0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
>
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
>
>   ------------------------------------------------------------------------
>                Name: att1.eml
>    att1.eml    Type: unspecified type (application/octet-stream)
>            Encoding: base64

Hm... I'd say things go wrong about the time you start getting all those zeros.
I've never seen that. Any idea why you are? Is the server side really sending
all
that crap?

--gmcnutt

att1.eml