[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [bluetooth-dev] CSR BC01b - can't do readbd
Other than setting the flow control, that is all that I did to get the 1115
stack to work with CSR.
> -----Original Message-----
> From: Andreas Petralia [mailto:firstname.lastname@example.org]
> Sent: Friday, February 16, 2001 10:49 AM
> To: email@example.com
> Subject: [bluetooth-dev] CSR BC01b - can't do readbd
> i have a CSR BC01b (f/w beta9) and i can't read the bt-address.
> everything works ok with the ericsson module....
> here what i do:
> 1. erase the flash
> 2. download beta9
> 3. verify
> 4. with PSTools i set the following:
> 5. Host Interface = UART link running H4
> 6. UART: Partity Bits = No parity
> 7. UART: non-BCSP enable = Enable
> 8. UART baud rate = 115200
> 9. Reset BC
> 10. insmod src/bt.o
> 11. btd -u /dev/ttyS0 -s 115200 -e 0 -m -i csr
> 12. btduser -u .......
> have i missed something?
> is there someone running this HW with bt vers. 1115?
> To unsubscribe from this list: send the line "unsubscribe
> bluetooth-dev" in
> the body of a message to firstname.lastname@example.org
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to email@example.com