[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
Re: [bluetooth-dev] Axis on Serial with iPaq
Franck THIBAUT wrote:
> I'm trying to port AXIS BT on a iPAQ running under kernel 2.4. Since USB is
> not supported by my kernel, I try to use AXIS BT on the serial port
> (/dev/ttySA0), but it doesn't work : my device (an ERICSSON HW) is not
> detected by the stack and this one try to run HCI EMULATOR...
> Is there someone to help me ?
> Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com.
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
> the body of a message to firstname.lastname@example.org
1. Make sure you have the ARM patch for the Axis stack on the iPaq
2. Make sure the serial port is not being used as a console (the kernel boot
commandline should NOT contain 'console=0')
3. Make sure inittab does not spawn any getty's on the serial port
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to email@example.com