[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] Re: ppp -> HANGS!!!!



Hi Sami
 I am able to run ppp now...after a lotta initiall hiccups
 my solution.......
 1 check if u can run ppp w/o the bt stack....
 
run bt on the server wiht 
> btduser -u /dev/ttyS0 -s 115200 -r server -i none -m -d 10.0.16.228 -D 10.0.16.228  -e 0

on ther server with 

> btduser -u /dev/ttyS0 -s 115200 -r server -i none -m -D 10.0.16.228 -d 10.0.16.228  -e 0


 on the server and client on the bt menu promt run
rf_conn 11:22:33:44:55:66 0
rf_conn 11:22:33:44:55:66 1
rf_conn 11:22:33:44:55:66 2
ppp

server reports Connect: ppp0<-->/dev/pts/?
once u run ppp on the client
client reports
>>>>
Running PPPD
Using interface ppp0
Connect: ppp0 <--> /dev/pts/6
sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x9509759e> <pcomp> <accomp>]
rcvd [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x349c89a6> <pcomp> <accomp>]
sent [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x349c89a6> <pcomp> <accomp>]
rcvd [LCP ConfAck id=0x1 <asyncmap 0x0> <magic 0x9509759e> <pcomp> <accomp>]
sent [IPCP ConfReq id=0x1 <addr 10.0.16.41> <compress VJ 0f 01>]
sent [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfReq id=0x1 <addr 10.0.16.228> <compress VJ 0f 01>]
sent [IPCP ConfAck id=0x1 <addr 10.0.16.228> <compress VJ 0f 01>]
rcvd [CCP ConfReq id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
sent [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
rcvd [IPCP ConfAck id=0x1 <addr 10.0.16.41> <compress VJ 0f 01>]
local  IP address 10.0.16.41
remote IP address 10.0.16.228
Script /etc/ppp/ip-up started (pid 1155)
rcvd [CCP ConfAck id=0x1 <deflate 15> <deflate(old#) 15> <bsd v1 15>]
Deflate (15) compression enabled
Script /etc/ppp/ip-up finished (pid 1155), status = 0x0

>>>
server too reports something similiar now that ppp connecton is setup
from another term now u can ping ur m/c over the serial cable....
=> ppp connection is setup.

hope this helps
 
 Regards, 
 Danny 
 
Thus Said Sami Kibria On Wed, Feb 21, 2001 at 04:49:53PM -0600 :
*->hello everyone...
*->
*->i was wondering if i could as for some help...well i am using the
*->bluetooth axis stack version of bluetooth_20001115 (not the newest one but
*->the last one to the newest one...anyways) and i want to run ppp over
*->bluetooth.
*->
*->here are my steps...
*->
*->--server side
*->1. ./btd --reset --cmdmode
*->
*->--client side
*->1. ./btd --reset --cmdmode --clinet
*->2. (from the list of commands i choose) PPP
*->now it just hangs here!!!!
*->
*->am i doing something wrong???
*->
*->thanks
*->
*->
*-> -------------------------------------------------------
*-> Sami Kibria 
*-> Researcher
*-> TRLabs - Winnipeg, MB.  CANADA
*-> email: skibria@xxxxxxx.ca
*-> -------------------------------------------------------
*->
*->
*->-
*->To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
*->the body of a message to majordomo@xxxxxxx.com

-- 
   _____________________________________________

    Daniel D. Ezekiel                                
    E-Mail  : danny@xxxxxxx.com                         
    Fone    : 91-80-5281461  Extn: 3322 

    PGP Key : hkp://keys.pgp.com/danny@xxxxxxx.com       
   ______________________________________________
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com