[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] Re: ppp -> HANGS!!!!



That was to make clear that without the stack I could establish a ppp
connection, ie I wanted to make it clear that the problem was not due
to incorrect ppp setup.

Anywayz its working fine now....


Thus Said Lim Yong Beng On Tue, Feb 27, 2001 at 04:23:01PM +0800 :
*->Hi, what do u mean u can establish ppp conn without using the BT stack?? I
*->thought by the command "btduser ...." u are setting up the BT stack.
*->
*->Rgds,
*->Garion
*->
*->-----Original Message-----
*->From: Daniel Ezekiel [mailto:danny@xxxxxxx.com]
*->Sent: Monday, February 26, 2001 2:26 PM
*->To: Daniel Ezekiel
*->Cc: eng70834@xxxxxxx.sg; bluetooth development
*->Subject: Re: [bluetooth-dev] Re: ppp -> HANGS!!!!
*->
*->
*->Addendum
*->  I can establish ppp connection without using the BT stack
*-> 
*->for client side my command is
*->btduser -u /dev/ttyS0 -s 115200 -r client -i none -m -e 0 -d 10.0.16.41 -D
*->10.0.16.228
*->for server side
*->
*->btduser -u /dev/ttyS0 -s 115200 -r server -i none -m -e 0 -d 10.0.16.228 -D
*->10.0.16.41
*->
*->Thus Said Daniel Ezekiel On Mon, Feb 26, 2001 at 11:35:16AM +0530 :
*->*->Hi
*->*-> I am trying to establish ppp connection b/w 2 linux boxes runnin stack
*->*->over emulation mode via a null modem connection, 20001115 stack
*->*->
*->*->The client reports
*->*->unning PPPD 
*->*->Using interface ppp0
*->*->Connect: ppp0 <--> /dev/pts/6
*->*->sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x12c2ec8d> <pcomp>
*-><accomp>]
*->*->BT SYS: ERROR :rfcomm_send_data: DLCI 2 not connected
*->*->error
*->*->sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x12c2ec8d> <pcomp>
*-><accomp>]
*->*->BT SYS: ERROR :rfcomm_send_data: DLCI 2 not connected
*->*->error
*->*->sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x12c2ec8d> <pcomp>
*-><accomp>]
*->*->BT SYS: ERROR :rfcomm_send_data: DLCI 2 not connected
*->*->error
*->*->sent [LCP ConfReq id=0x1 <asyncmap 0x0> <magic 0x12c2ec8d> <pcomp>
*-><accomp>]
*->*->BT SYS: ERROR :rfcomm_send_data: DLCI 2 not connected
*->*->error
*->*->
*->*->after I issue ppp connection
*->*->
*->*->on the server I used
*->*->rf_conn 11:22...66 0
*->*->rf_conn 11:22...66 1
*->*->rf_conn 11:22...66 2
*->*->and then issued ppp command it seays 
*->*->Using interface ppp0
*->*->Connect: ppp0 <--> /dev/pts/0
*->*->
*->*->Am I missing something.........both mcs report got response for
*->*->ping 11:22....66
*->*->
*->*->Thanks
*->*-> 
*->*-> Regards, 
*->*-> Danny 
*->*-> 
*->*->
*->*->Thus Said Chia Benham On Fri, Feb 23, 2001 at 02:03:41AM +0800 :
*->*->*->First, in order for the ppp to work, you need to connect the rfcomm
*->first.
*->*->*->However, for the 20001115 version of the stack, the "con" command is
*->*->*->disabled. So, what you can do is to use the userstack ie."btduser"
*->with the
*->*->*->parameters same as "btd". Then additional menu will appear and you can
*->use
*->*->*->"rf_conn" to connect up both server channel 0 and 1. Channel 0 is for
*->*->*->signalling and channel 1 is for data. Then you can start ppp on both
*->machine
*->*->*->and it should connect. I previously has posted a summary of what I
*->have
*->*->*->managed to test the stack with Null Modem Emulation. Attached for your
*->*->*->reference, hope it helps.
*->*->*->
*->*->*->Benham
*->*->*->
*->*->*->
*->*->*->
*->*->*->
*->*->*->-----Original Message-----
*->*->*->From: owner-bluetooth-dev@xxxxxxx.com
*->*->*->[mailto:owner-bluetooth-dev@xxxxxxx.com]On Behalf Of Sami Kibria
*->*->*->Sent: Friday, February 23, 2001 1:25 AM
*->*->*->To: Daniel Ezekiel
*->*->*->Cc: bluetooth development
*->*->*->Subject: Re: [bluetooth-dev] Re: ppp -> HANGS!!!!
*->*->*->
*->*->*->
*->*->*->okay, well i am trying some new stuff right now...i got a previous
*->email
*->*->*->from Lim Yong Beng and in the email he said add the local ip add, and
*->*->*->remote ip add...
*->*->*->
*->*->*->well i did, i used the parameter -d <local ip add> and -D <remote ip
*->add>,
*->*->*->and still no luck...maybe i am using it wrong???
*->*->*->
*->*->*->i was wondering if you had any suggestions daniel, or even lim, about
*->*->*->what to do??? i am a little confused myself, there doesn't seem to be
*->much
*->*->*->documentation on this...
*->*->*->
*->*->*->by the way when i do a send i still get the same error as well, well
*->not
*->*->*->really an error by it just hangs there...hmmmmmm.....
*->*->*->
*->*->*->????
*->*->*->
*->*->*->talk to you later
*->*->*->
*->*->*->
*->*->*-> -------------------------------------------------------
*->*->*-> Sami Kibria
*->*->*-> Researcher
*->*->*-> TRLabs - Winnipeg, MB.  CANADA
*->*->*-> email: skibria@xxxxxxx.ca
*->*->*-> -------------------------------------------------------
*->*->*->
*->*->*->
*->*->*->On Thu, 22 Feb 2001, Daniel Ezekiel wrote:
*->*->*->
*->*->*->> YuP
*->*->*->>  I have the same problem too....as well as any other command
*->*->*->>  say 'send 100 100' says
*->*->*->> Now sending 1000 100-bytes packet (100 kB)
*->*->*->>
*->*->*->> after that does nothing (does not return to the menu prompt)
*->*->*->>
*->*->*->> same for ecs_testcontrol 11:22:33:44:55:66
*->*->*->> The server reports
*->*->*->>  BT SYS: ERROR :Discarding 13 bytes and waitin forever.....
*->*->*->>
*->*->*->>  after that the client does not return to menu prompt
*->*->*->>
*->*->*->> I am running 2 linux boxes over  a serial line connection in
*->emulation
*->*->*->mode
*->*->*->> compiled with  HCI_EMULATION and define HW_DEFAULT HW_NOINIT
*->*->*->> stack version bluetooth_20001115
*->*->*->>
*->*->*->> Any quick help would be appreciated
*->*->*->>
*->*->*->>  Regards,
*->*->*->>  Danny
*->*->*->>
*->*->*->>    _____________________________________________
*->*->*->>
*->*->*->>     Daniel D. Ezekiel
*->*->*->>     E-Mail  : danny@xxxxxxx.com
*->*->*->>     Fone    : 91-80-5281461  Extn: 3322
*->*->*->>
*->*->*->>     PGP Key : hkp://keys.pgp.com/danny@xxxxxxx.com
*->*->*->>    ______________________________________________
*->*->*->>
*->*->*->
*->*->*->
*->*->*->
*->*->*->
*->*->*->-
*->*->*->To unsubscribe from this list: send the line "unsubscribe
*->bluetooth-dev" in
*->*->*->the body of a message to majordomo@xxxxxxx.com
*->*->
*->*->*->Date: Sat, 30 Dec 2000 01:03:29 +0800
*->*->*->From: "Chia Benham" <chiabenham@xxxxxxx.com>
*->*->*->Subject: RE: [bluetooth-dev] Evaluations of  Axis bluetooth_20001031
*->and  _1115.  with null modem
*->*->*->To: <bluetooth-dev@xxxxxxx.com>
*->*->*->
*->*->*->I am using null modem for evaluation. I managed to get both the 1115
*->and
*->*->*->1031 stacks working in user mode with PPP running. Below are for your
*->*->*->reference. Please correct me if I am wrong. I hope this will help.
*->*->*->
*->*->*->
*->*->*->Both compiled with "HCI_EMULATION" defined in btconfig.h.
*->*->*->Both with SDP server started "./sdp_user /etc/sdp.xml &"
*->*->*->
*->*->*->For 1031 stack,
*->*->*->
*->*->*->server command used "./btduser -u /dev/ttyS0 -s 115200 -r server -i
*->*->*->none -m -d 192.168.1.1 -D 192.168.1.2 -e 0"
*->*->*->client command used "./btduser -u /dev/ttyS0 -s 115200 -r client -i
*->*->*->none -m -d 192.168.1.1 -D 192.168.1.2 -e 0"
*->*->*->
*->*->*->then after stack initiation and reached the menu.
*->*->*->server command used "con 11:22:33:44:55:66 0 0 0"
*->*->*->the rfcomm layer should be connected and you should be able to test
*->rfcomm
*->*->*->layer with "send <data length> <number of times>"
*->*->*->
*->*->*->To start PPP,
*->*->*->server command used "ppp"
*->*->*->client command used "ppp"
*->*->*->both PC should be connected with PPP.
*->*->*->"ifconfig" should display a PPP connection.
*->*->*->
*->*->*->
*->*->*->
*->*->*->For 1115 stack,
*->*->*->
*->*->*->server command used "./btduser -u /dev/ttyS0 -s 115200 -r server -i
*->*->*->none -m -d 192.168.1.1 -D 192.168.1.2 -e 0"
*->*->*->client command used "./btduser -u /dev/ttyS0 -s 115200 -r client -i
*->*->*->none -m -d 192.168.1.1 -D 192.168.1.2 -e 0"
*->*->*->
*->*->*->then after stack initiation and reached the menu.
*->*->*->the "con "<xx:xx:xx:xx:xx:xx> <x> <x> <x>" is disabled.
*->*->*->so have to manually use "rf_conn" to connect the rfcomm layer.
*->*->*->server command used "rf_conn 0"
*->*->*->server command used "rf_conn 1"
*->*->*->server command used "rf_conn 2"
*->*->*->Three channels required because channel 0 and 1 are for control
*->purposes and
*->*->*->channel 2 is for data. This part I am not very sure, still need to be
*->*->*->verify.
*->*->*->
*->*->*->To start PPP,
*->*->*->server command used "ppp"
*->*->*->client command used "ppp"
*->*->*->both PC should be connected with PPP.
*->*->*->"ifconfig" should display a PPP connection.
*->*->*->
*->*->*->
*->*->*->Can someone please enligthen me how to connect in kernel mode with
*->null
*->*->*->modem? I can't seem it get it working. Thanks.
*->*->*->
*->*->*->Benham
*->*->*->
*->*->*->
*->*->*->
*->*->*->
*->*->*->
*->*->*->-----Original Message-----
*->*->*->From: gmcnutt@xxxxxxx.sg]On">mailto:gmcnutt@xxxxxxx.sg]On
*->*->*->Behalf Of Gordon McNutt
*->*->*->Sent: Friday, December 29, 2000 1:55 AM
*->*->*->To: sklaw
*->*->*->Cc: eng70834@xxxxxxx.com
*->*->*->Subject: Re: [bluetooth-dev] Evaluations of Axis bluetooth_20001031
*->and
*->*->*->_1115. with null modem
*->*->*->
*->*->*->
*->*->*->sklaw wrote:
*->*->*->
*->*->*->> Hi Benham,
*->*->*->>
*->*->*->> Thanks.  Please tell you use real bt or null modem for evaluation.
*->*->*->>
*->*->*->> It seems we got the same findings that user mode works fine but not
*->with
*->*->*->> kernel mode command in both _0814 and 1031 .
*->*->*->>
*->*->*->> For _1115,  we tried ppp and rf_conn and got handle 0 and return to
*->*->*->command
*->*->*->> menu without CRC_Check error in both kernel mode and user mode.  Is
*->that
*->*->*->> because you use bt instead of null modem? Please confirm!
*->*->*->>
*->*->*->> If anyone got kernel mode connected, please help! Because according
*->to
*->*->*->> previous email discussion with null modem, kernel mode command  btd
*->-m
*->*->*->> .......  instead of btduser -m ........ commands is used.
*->*->*->>
*->*->*->
*->*->*->I've had kernel mode working in both 8/14 and 10/31.
*->*->*->
*->*->*->If you're certain that you really are not getting a connection then
*->turn on
*->*->*->debug and, if you want help deciphering it, post it here. Debug flags
*->are in
*->*->*->btdebug.h.
*->*->*->
*->*->*->--Gordon
*->*->*->
*->*->*->
*->*->*->_________________________________________________________
*->*->*->Do You Yahoo!?
*->*->*->Get your free @xxxxxxx.com">http://mail.yahoo.com
*->*->*->
*->*->*->-
*->*->*->To unsubscribe from this list: send the line "unsubscribe
*->bluetooth-dev" in
*->*->*->the body of a message to majordomo@xxxxxxx.com
*->*->
*->*->
*->*->-- 
*->*->   _____________________________________________
*->*->
*->*->    Daniel D. Ezekiel                                
*->*->    E-Mail  : danny@xxxxxxx.com                         
*->*->    Fone    : 91-80-5281461  Extn: 3322 
*->*->
*->*->    PGP Key : hkp://keys.pgp.com/danny@xxxxxxx.com       
*->*->   ______________________________________________
*->*->-
*->*->To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
*->in
*->*->the body of a message to majordomo@xxxxxxx.com
*->
*->-- 
*->   _____________________________________________
*->
*->    Daniel D. Ezekiel                                
*->    E-Mail  : danny@xxxxxxx.com                         
*->    Fone    : 91-80-5281461  Extn: 3322 
*->
*->    PGP Key : hkp://keys.pgp.com/danny@xxxxxxx.com       
*->   ______________________________________________
*->-
*->To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
*->the body of a message to majordomo@xxxxxxx.com

-- 
   _____________________________________________

    Daniel D. Ezekiel                                
    E-Mail  : danny@xxxxxxx.com                         
    Fone    : 91-80-5281461  Extn: 3322 

    PGP Key : hkp://keys.pgp.com/danny@xxxxxxx.com       
   ______________________________________________
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com