[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[bluetooth-dev] SDP question



Hi,

here is a little snippet from sdp.xml. Parameter0 of RFCOMM in the
ProtocolDescriptorList is 0x0801.
But why ? As I understood, this parameter contains the RFCOMM
serverchannel number that should be used for this profile.
Doesn't the Axis stack uses serverchannel 2 for this profile ? So where
does this 0x0801 come from ?

Thanks
Matthias

   <LANAccessUsingPPP ServiceRecordHandle = "0x0010ffff">
         <ServiceRecordHandle Parameter0 = "0x0a0010ffff">
         </ServiceRecordHandle>
         <ServiceClassIDList NbrOfEntities = "1">
            <LANAccessUsingPPP>
            </LANAccessUsingPPP>
         </ServiceClassIDList>
         <ProtocolDescriptorList NbrOfEntities = "2">
            <L2CAP type = "DES">
            </L2CAP>
            <RFCOMM type = "DES" Parameter0 = "0x0801">
            </RFCOMM>
         </ProtocolDescriptorList>
         <BrowseGroupList NbrOfEntities = "1">
            <PublicBrowseGroup>
            </PublicBrowseGroup>
         </BrowseGroupList>
         <BluetoothProfileDescriptorList NbrOfEntities = "1">
            <LANAccessUsingPPP type = "DES" Parameter0 = "0x090100">
            </LANAccessUsingPPP>
    
-- 
-------------------------------------------------
\ Matthias Fuchs                                 \
 \ esd electronic system design Gmbh              \
  \ Vahrenwalder Straße 205                        \
   \ D-30165 Hannover                               \
    \ email: matthias.fuchs@xxxxxxx.com      \
     \ phone: +49-511-37298-0                         \
      \ fax:   +49-511-37298-68                        \
       --------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com