[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: [bluetooth-dev] btd application - connect failed



Hi Matthias !

> this might be a problem with your "other side". Can you tell us what
> your other side looks like (Device type, software etc).

The other side is also a Linux PC with OpenBT stack !

> Is it possible that you swapped the BD_ADDR between the inquiry result
> and the rf_conn command ? See below ?

I don´t think I swapped the BD_ADDR ! After the inquiry I get
00:00:00:00:00:52
and I connect with rf_conn 00:00:00:00:00:52 1 1 !!


> Matthias
> 
> Frank Wöhrle wrote:
> > 
> > Hello
> > 
> > When I run the btd application with my modules I can start 
> an inquiry an get
> > the BD_Adress
> > from my second module.
> > Then after making an rf_conn I get "Connect failed [HCI - 
> Page Timeout
> > ((4))]" !
> > 
> > The debug messages are:
> > 
> > Apr 23 13:50:50 blue2 kernel: hci_inquiry (9)
> > Apr 23 13:50:50 blue2 kernel:    0x01 0x01 0x04 0x05 0x33 
> 0x8b 0x9e 0x0a
> > 0x01
> > Apr 23 13:50:53 blue2 kernel: BD addr 1
> > Apr 23 13:50:53 blue2 kernel:
> > Apr 23 13:50:53 blue2 kernel: BD (6)
> > Apr 23 13:50:53 blue2 kernel:    0x00 0x00 0x00 0x00 0x00 0x52
> Inquiry result ---------------------------^
> 
> > Apr 23 13:51:12 blue2 kernel: BT (driver) bt_ioctl: BTCONNECT
> > Apr 23 13:51:12 blue2 kernel: BT (driver) bt_connect : 
> Connecting srv ch 1
> > on line 1
> > Apr 23 13:51:12 blue2 kernel: we don't have l2cap ch yet 
> for this rfcomm ch
> > Apr 23 13:51:12 blue2 kernel:
> > Apr 23 13:51:12 blue2 kernel: bd (6)
> > Apr 23 13:51:12 blue2 kernel:    0x52 0x00 0x00 0x00 0x00 0x00
> rf_conn address you entered ------------------^
> They seem to be swapped :-)
> > Apr 23 13:51:12 blue2 kernel: sleep on line 1
> > Apr 23 13:51:18 blue2 kernel: bt_connect_cfm status : 4
> > Apr 23 13:51:18 blue2 kernel: BT (driver) bt_connect_cfm [RCOMM]
> > Apr 23 13:51:18 blue2 kernel: BT (driver) bt_connect_cfm, 
> line 1 [RCOMM]
> > Apr 23 13:51:18 blue2 kernel: BT SYS: ACL link failed for 
> some reason,
> > remove con object
> > Apr 23 13:51:18 blue2 kernel: BT SYS: process_event, 
> CONNECTION_COMPLETE
> > Page Timeout
> > Apr 23 13:51:18 blue2 kernel: BT SYS: ERROR 
> :reset_hci_con_bd, : Didn't find
> > connection with con_hdl 0
> > 
> > What´s wrong ? Has anybody some suggestions ?
> > 
> > with regards
> > Frank
> > 
> > -
> > To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> > the body of a message to majordomo@xxxxxxx.com
> 
> -- 
> -------------------------------------------------
> \ Matthias Fuchs                                 \
>  \ esd electronic system design Gmbh              \
>   \ Vahrenwalder Straße 205                        \
>    \ D-30165 Hannover                               \
>     \ email: matthias.fuchs@xxxxxxx.com      \
>      \ phone: +49-511-37298-0                         \
>       \ fax:   +49-511-37298-68                        \
>        --------------------------------------------------
> -
> To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
> 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com