[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] cannot run 20010507 stack under kernel mode



hello, i have also try the latest CVS, but the problem remains. and i also
tried it under usermode, and find that the receiving side only can receive
up to 4064 bytes data, the bluetooth module actually received the data and
passed them to the host pc, but the stack unable to get the data.

best regards,
liu yong


-----Original Message-----
From:	V.Kugan
Sent:	Mon 28/05/2001 8:39 PM
To:	#LIU YONG#
Cc:	
Subject:	RE: [bluetooth-dev] cannot run 20010507 stack under kernel
mode

Hi
then why dont u get the latest CVS and try, that works fine.

as with this since the error is
ERROR: init_phy() not implemented!
Registered bluetooth line discipline on /dev/ttyUB0
open_device: No such file or directory

It has some thing to do with ,  bt.o is not linked to the kernel
what message u r getting when u insmod bt.o

why dont u enable debug messages in btdebug.h and try. may be u should post
the complete debug messages to the list
Regards
Kugan

-----Original Message-----
From: #LIU YONG# [mailto:144102622@xxxxxxx.sg]
Sent: Monday, May 28, 2001 7:25 AM
To: V.Kugan
Subject: RE: [bluetooth-dev] cannot run 20010507 stack under kernel mode


hi, i have done all these.


-----Original Message-----
From:	V.Kugan
Sent:	Sat 26/05/2001 6:57 PM
To:	#LIU YONG#
Cc:
Subject:	RE: [bluetooth-dev] cannot run 20010507 stack under kernel
mode

did u do
make nodes
and also insmod bt.o

-----Original Message-----
From: owner-bluetooth-dev@xxxxxxx.com
[mailto:owner-bluetooth-dev@xxxxxxx.com]On Behalf Of #LIU YONG#
Sent: Saturday, May 26, 2001 3:28 AM
To: bluetooth-dev@xxxxxxx.com
Subject: [bluetooth-dev] cannot run 20010507 stack under kernel mode


hi all, i am having problem when try to run the 20010507 stack under kernel
mode. the information is as following,

./btd -e 0 -m -u /dev/ttyUB0

...
Running as server
Phydev /dev/ttyUB0, btdev dev/ttyBT0, speed 115200 baud
sdp_server: no such file or directory
bt_hw_vendor: no  such file or directory
ERROR: init_phy() not implemented!
Registered bluetooth line discipline on /dev/ttyUB0
open_device: No such file or directory

then the stack was shutdown.

but i have no problem on running this stack under user mode and running the
20001115 stack.


ur help will be appreciated!


best regards,
liu yong




-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com


-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com