[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] bluetooth.c USB driver won't recognize Ericsson device



On Tue, Jun 05, 2001 at 01:19:39PM -0400, Ilguiz Latypov wrote:
> hub.c: USB new device connect on bus1/1, assigned device number 5
> bluetooth.c: found bulk in
> bluetooth.c: found bulk out
> bluetooth.c: found interrupt in
> bluetooth.c: USB Bluetooth converter detected
> bluetooth.c: Bluetooth converter now attached to ttyUB0 (or usb/ttub/0 for devfs)
> bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound.
> bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound.
> bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound.
> bluetooth.c: usb_bluetooth_probe - improper number of endpoints. Bluetooth driver not bound.

The device was found, and attached to ttyUB0.  The other 4 messages are
the driver complaining about the fact that it doesn't know how to talk
to the SCO interfaces that the Ericsson device exports.  Since the Axis
stack also doesn't know how to use SCO, there isn't a problem.


> usb.c: USB disconnect on device 5
> bluetooth.c: Bluetooth converter now disconnected from ttyUB0

Now you removed the device.

So have you tried using the device?  Or just stopped when you saw the
"driver not bound." messages?

thanks,

greg k-h
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com