[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] Wrong device?





> -----Original Message-----
> From: Wijnhoven, R.G.J. [mailto:R.G.J.Wijnhoven@xxxxxxx.nl]
> Sent: Tuesday, June 05, 2001 5:25 PM
> To: 'bluetooth-dev@xxxxxxx.com'
> Subject: [bluetooth-dev] Wrong device?
> 
> 
> Hi,
> 
> I finally got openbt-20010507 working again after trying 
> openbt-20010530
> (thnx all for the information). When I start btd in 
> commandline and request
> the local bt address, I get 00:00:00:00:00:00.
> 
> [...]#btd -m
> Bluetooth Control Application
> -----------------------------
> Running as server
> Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 115200 baud
> Registered bluetooth line discipline on /dev/ttyS0
> Init stack
> Setting write_scan_enable in Ericsson module!
> Setting event filter in Ericsson module!
> Setting baudrate in Ericsson module!
> Now entering cmd line mode
> [...]
> 
> > readbd
> Current bd addr : 00:00:00:00:00:00
> 
> I am using the Ericsson HW and kernel 2.4.4, openbt-20010507...
> 
> Am I trying to communicate with the wrong device? What is wrong?
> 


The Ericsson HW should use 57600 baud.
Infineon uses 115200 baud.

Maybe you should try to change the baudrate.

Hope this helps.


Regards
Markus


-----------------------------------------------------------
This Mail has been checked for Viruses
Attention: Encrypted Mails can NOT be checked !

***

Diese Mail wurde auf Viren ueberprueft
Hinweis: Verschluesselte Mails koennen NICHT geprueft werden!
------------------------------------------------------------
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com