[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] Re: WRITE_LINK_POLICY_SETTINGS: Unknown HCI



Herve,

have you already tried to get answers from one of Digianswer's public
newsgroups (news.digianswer.com)?

Roland

----- Original Message -----
From: "Hervé Suaudeau" <herve.suaudeau@xxxxxxx.fr>
To: <bluetooth-dev@xxxxxxx.com>
Sent: Wednesday, June 13, 2001 7:12 PM
Subject: RE: [bluetooth-dev] Re: WRITE_LINK_POLICY_SETTINGS: Unknown HCI


> Thanks a lot for your answer, but I can not solve my PPP problem.
>
> Does anybody think it is an interoperability problem?
> (I connect the Ericson BDK with a Digianswer device.
> And transmission through a terminal is OK :
> terminal-->ttyBT0-->EBDK--> BT channel -->Digianswer-->virtual COM
> port-->terminal
> )
>
> Herve Suaudeau.
>
> > -----Original Message-----
> > From: Helemann Sven ICM WM RD 23 (WS)
> > [mailto:Sven.Helemann@xxxxxxx.de]
> > Sent: Wednesday, June 13, 2001 10:25 AM
> > To: 'herve@xxxxxxx.com'
> > Subject: AW: [bluetooth-dev] Re: WRITE_LINK_POLICY_SETTINGS:
> > Unknown HCI
> >
> >
> > I use the EBDK Board's and have no problems with PPP connections!
> >
> > -----Ursprüngliche Nachricht-----
> > Von: Herve Suaudeau [mailto:suaudeau@xxxxxxx.fr]
> > Gesendet am: Mittwoch, 13. Juni 2001 10:11
> > An: bluetooth-dev@xxxxxxx.com
> > Betreff: [bluetooth-dev] Re: Re: WRITE_LINK_POLICY_SETTINGS:
> > Unknown HCI
> >
> > Thanks for the answer but does anybody think that
> > error prevents me from connecting with PPP or it has
> > no point with?
> >
> > Herve Suaudeau.
> >
> > > -----Original Message-----
> > > From: Helemann Sven ICM WM RD 23 (WS)
> > > [mailto:Sven.Helemann@xxxxxxx.de]
> > > Sent: Wednesday, June 13, 2001 8:30 AM
> > > To: bluetooth-dev@xxxxxxx.com
> > > Subject: AW: [bluetooth-dev]
> > WRITE_LINK_POLICY_SETTINGS: Unknown HCI
> > > Command
> > >
> > >
> > > Hi,
> > > the is a Document from Ericsson: Ericsson HCI
> > firmware
> > > implemented features
> > > and limitations. This document list which of the
> > commands and
> > > events that
> > > have been implemented by Ericsson. This document is
> > written
> > > for baseband
> > > processor version B P5A and firmware release P12A.
> > The
> > > WRITE_LINK_POLICY_SETTINGS are not supported.Sorry
> > >
> > > -----Ursprüngliche Nachricht-----
> > > Von: Herve Suaudeau [mailto:suaudeau@xxxxxxx.fr]
> > > Gesendet am: Dienstag, 12. Juni 2001 18:43
> > > An: bluetooth-dev@xxxxxxx.com
> > > Betreff: [bluetooth-dev] WRITE_LINK_POLICY_SETTINGS:
> > Unknown
> > > HCI Command
> > >
> > > Hi all,
> > >
> > > I desperately try to do a PPP connection between an
> > > Ericson kit on Linux and a Digianswer device on
> > Win2K.
> > > My Linux station is PPP a server, and when I try to
> > > launch a LAN access using PPP from the Win2k station
> > I
> > > have the error message WRITE_LINK_POLICY_SETTINGS:
> > > Unknown HCI Command.
> > >
> > > What this message means? And has someone an idea how
> > > can I succeed a PPP connection?
> > >
> > > Thank you in advance.
> > >
> > > Herve SUAUDEAU
> > >
> > > Here are more precision about my environment:
> > >
> > > --> I use openbt-20010530 with a 2.4.2 kernel. (Same
> > > effect with the former version of openbt)
> > >
> > > --> /var/log/messages
> > > 16:04:51 kernel: lp_connect_cfm (pos), wake up flag
> > > not set
> > > 16:04:51 kernel: BT SYS: process_event, ACL link is
> > up
> > > 16:04:51 kernel: write_link_policy_settings
> > > 16:04:51 kernel:    0x04 0x0e 0x06 0x01 0x0d 0x08
> > 0x01
> > > 0x01 0x00
> > > 16:04:51 kernel: process_return_param,
> > > WRITE_LINK_POLICY_SETTINGS
> > > 16:04:51 kernel:  BT SYS: ERROR
> > :process_return_param,
> > > WRITE_LINK_POLICY_SETTINGS: Unknown HCI Command
> > >
> > > --> When btd has correctly initialized the device I
> > > launch the PPP server (pppd 2.4.1) with the
> > following
> > > options:
> > > /dev/ttyBT0 57600 debug -detach persist ktune dump
> > > noauth lock crtscts local mtu 296
> > > 10.243.47.201:10.243.47.117 defaultroute
> > > This configuration is functional if I do not use the
> > > stack and if I replace all bluetooth devices by a
> > > null-modem cable.
> > > Pppd send every second the following requests:
> > > sent [LCP ConfReq id=0x2 <asyncmap 0x0> <magic
> > > 0xb609f446> <pcomp> <accomp>]
>
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
in
> the body of a message to majordomo@xxxxxxx.com

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com