[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[bluetooth-dev] PPPd on ARM



Hi All
I have somehow sort out my earlier problrm, Thanx to Andreas Petralia , But
now I have got into a
new problem.
After establishing RFCOMM connnection, when I start pppd , it dosent work
I am using ARM+uClinux+CSR, on the client side for ppp.

Sys log on the servere side shows


          RFCOMM rfcomm_connect_ind
          RFCOMM get_new_rfcomm_con: rfcomm_con -> ttyBT0
    L2CAP get_lcon: lcid 64 con_list.count = 1
          RFCOMM rfcomm_config_ind : remote cid 64

l2cap options:  (0)
    L2CAP get_lcon: lcid 64 con_list.count = 1
          RFCOMM rfcomm_config_cfm:
    L2CAP get_lcon: lcid 64 con_list.count = 1
          RFCOMM rfcomm_receive_data: SABM-packet received
          RFCOMM rfcomm_receive_data: server channel == 0
          RFCOMM rfcomm_receive_data: setting l2cap_con, no ser
v.channel yet
          RFCOMM rfcomm_receive_data: sending back UA - control
 channel
          RFCOMM send_ua: Creating UA packet to DLCI 0
    L2CAP get_lcon: lcid 64 con_list.count = 1
          RFCOMM process_mcc
          RFCOMM process_mcc: Received DLC parameter negotiatio
n, PN
          RFCOMM send_pn_msg: DLCI 0x04, prior:0x07, frame_size
:127, credit_flow:0, credits:0, cr:0
          RFCOMM process_mcc: process_mcc : mtu set to 127
    L2CAP get_lcon: lcid 64 con_list.count = 1
          RFCOMM rfcomm_receive_data: SABM-packet received
          RFCOMM rfcomm_receive_data: sending back UA - other c
hannel
          RFCOMM send_ua: Creating UA packet to DLCI 4
    L2CAP get_lcon: lcid 64 con_list.count = 1
          RFCOMM process_mcc
          RFCOMM process_mcc: Received Modem status command
          RFCOMM process_mcc: Flow ON, dlci 4
    L2CAP get_lcon: lcid 64 con_list.count = 1
          RFCOMM process_mcc
          RFCOMM process_mcc: Received Modem status response
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1
    L2CAP get_lcon: lcid 64 con_list.count = 1

and on the client side
Starting PPP

Spawned pppd[8] in the backgrounBT (driver) bt_open on line 0
BT (driver) Registering tty on line 0 (pppd)
BT (driver) bt_open on line 0
BT (driver) Registering tty on line 0 (pppd)
BT SYS: warning :bt_register_tty : line busy !
BT (driver) bt_close on line 0
BT (driver) Unregistering tty on line 0
BT SYS: warning :bt_write_top : line 0 is not in active state


I would appreciate your comments, thanx in Advance
Best Regards
Kugan

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com