[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] SDP connection problems (WRITE_LINK_POLICY_SETTINGS)



Ericcson IrmaB does not support it (at least no P9A), the command is 
needed when doing master slave switch. You can uncomment it in hci.c 
(search for 'write_link_policy_settings') to avoid the error message.

brgds
Mattias

> -----Original Message-----
> From: Magnusson, Johan [mailto:johan.magnusson@xxxxxxx.se]
> Sent: den 3 juli 2001 15:57
> To: 'bluetooth-dev@xxxxxxx.com'
> Subject: [bluetooth-dev] SDP connection problems
> (WRITE_LINK_POLICY_SETTINGS)
> 
> 
> Hi, again....
> 
> What is WRITE_LINK_POLICY_SETTINGS and why does not HCI understand it?
> By the way.. I am running BT 0.0.4 on my devboard_LX.
> 
> What have I done wrong here?
> 
> Best regards
> Johan K Magnusson
> 
> 
> BT SYS: hci_init, Host flow control not enabled
> BT SYS: M/S switch disabled
> BT SYS: Force M/S switch set to 0
> BT SYS: Initialising L2CAP
> BT SYS: Local bd [00:d0:b7:03:49:8e]
> BT SYS: Initialising RFCOMM
> BT SYS: Initialising SDP
> BT SYS: sdp_init, Init sdp as server
> BT SYS: Initialising TCS
> BT SYS: Initialising BTMEM [2500 bytes]
> BT (driver) setting write scan enable : [0x3]
> BT (driver) bt_ioctl: Setting baudrate in host controller to 460800
> BT (ldisc) bt_tty_ioctl cmd 0x5401
> BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x5401 to n_tty line disc
> BT (ldisc) bt_tty_ioctl cmd 0x5402
> BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x5402 to n_tty line disc
> BT (ldisc) bt_tty_ioctl cmd 0x5401
> BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x5401 to n_tty line disc
> BT (ldisc) bt_tty_ioctl cmd 0x540b
> BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x540b to n_tty line disc
> Jan  1 00:02:41 AxisProduct btd: Opening dev /dev/ttyBT0
> BT (driver) bt_open on line 0
> BT (driver) Registering tty on line 0 (btd)
> BT (driver) bt_flush_buffer, ignored
> Jan  1 00:02:41BT (driver) bt_chars_in_buffer : 0
>  AxisProduct btd: Starting modem_emulator
> lp_connect_cfm (pos), wake up flag not set
> BT SYS: process_event, ACL link is up
> write_link_policy_settings
> 
> l2cap options:  (0):
> BT SYS: l2cap channel (64,65) [SDP] connected
> BT SYS: sdp_config_cfm, we are the server
> process_return_param, WRITE_LINK_POLICY_SETTINGS
> BT SYS: ERROR :process_return_param, 
> WRITE_LINK_POLICY_SETTINGS: Unknown HCI
> Command
> -
> To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
> 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com