[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[bluetooth-dev] Command Disallowed



Hi all,

I have a Problem with the Axis Stack and an Infinion Bluemoon1 Chip. The
Stack starts fine, but it isn't possible to make an inquiry. RF_conn and
Readbd make no Problems!
Have anybody an Idea how can I solve this Problem?

Stack Version 0.0.3


btd: Initiating signal handler
btd: Starting SDP server [sdp_server]
sdp_server: SDP Server starting
btd: Opening dev /dev/ttyS0
kernel: BT (driver) bt_open on line 7
kernel: BT (driver) Registering tty on line 7
kernel: BT SYS: Now 1 open fd:s for ttyBTC
kernel: BT (driver) bt_close on line 7
kernel: BT (driver) Unregistering tty on line 7
kernel: BT (ldisc) bt_tty_open
kernel: BT SYS: Setting BT driver to use serial tty
btd: Opening dev /dev/ttyBTC
kernel: BT (driver) bt_open on line 7
kernel: BT (driver) Registering tty on line 7
kernel: BT SYS: Now 1 open fd:s for ttyBTC
kernel: BT (driver) bt_flush_buffer, ignored
kernel: BT SYS: Initialising Bluetooth Stack
BT SYS: Current HW: Infineon
kernel: BT SYS: hci_init, Initialising HCI
kernel: BT SYS: HCI emulator off
kernel: BT SYS: hci_init, Initialising HCI inbuffers [800]
kernel: BT SYS: hci_init, Reading buffer sizes in the module...
kernel:
kernel: HW module contains...
kernel: 5 ACL buffers at 339 bytes
kernel: 7 SCO buffers at 120 bytes
kernel:
kernel: Infineon LM-FW version is: 3.47
kernel: Infineon BB-FW version is: 00b9
kernel: BT SYS: hci_init, Host flow control not enabled
kernel: BT SYS: M/S switch disabled
kernel: BT SYS: Initialising L2CAP
kernel: BT SYS: Local bd [00:01:e3:00:88:d3]
kernel: BT SYS: Initialising RFCOMM
kernel: BT SYS: Initialising SDP
kernel: BT SYS: sdp_init, Init sdp as server
kernel: BT SYS: Initialising TCS
kernel: BT SYS: Initialising BTMEM [2500 bytes]
kernel: BT (driver) setting write scan enable : [0x3]
kernel: BT (driver) bt_ioctl: Setting baudrate in host controller to 57600
kernel: Infineon baudrate changes after this message
kernel: BT (ldisc) bt_tty_ioctl cmd 0x5401
kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x5401 to n_tty line
discJul  9 00:46:44 linux kernel: BT (ldisc) bt_tty_ioctl cmd x5402
kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x5402 to n_tty line
discJul  9 00:46:44 linux kernel: BT (ldisc) bt_tty_ioctl cmd x5401
kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x5401 to n_tty line
discJul  9 00:46:44 linux kernel: BT (ldisc) bt_tty_ioctl cmd x540b
kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl 0x540b to n_tty line
discJul  9 00:46:44 linux kernel: Infineon baudrate has changed to new value
kernel: BT (driver) bt_ioctl: HCINQUIRY
kernel:
kernel: hci_inquiry (9)
kernel:    0x01 0x01 0x04 0x05 0x33 0x8b 0x9e 0x02 0x02
kernel: BT SYS: ERROR :process_event, COMMAND_STATUS: Command Disallowed  






Best regards
Sven Helemann





Mit freundlichem Gruß
Sven Helemann
____________________________________________________________

Sven Helemann					Siemens AG
						ICM WM RD 21 
Tel. +49(0)30 386-31926				Siemensdamm 50
mailto:Sven.Helemann@xxxxxxx.de		13629 Berlin
						Germany
____________________________________________________________

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com