[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] pairing and role switch



hello, i think u can check the documentation of ur ebdk to see whether the
role switch is supported by the firmware. as i know, some features are not
supported by the ebdk firmware.
 
regards,
liu yong

-----Original Message----- 
From: Rommel Custodio 
Sent: Tue 17/07/2001 6:01 PM 
To: bluetooth-dev@xxxxxxx.com 
Cc: 
Subject: [bluetooth-dev] pairing and role switch



good morning, 

   i just got OpenBT 0.0.5 it runs ok on an old Linux kernel 
  (RH 2.2.14). 

   now that ive got it running, i proceeded to check out pairing 
  and role switching. i cant get a connection establish when 
  pairing is set to ON on a remote device and OFF on another 
  device. i always get a timeout. 

   also i tried role switch, i connected two devices at the L2CAP 
  level, an ACL link and channel id is therefore present. whenever 
  i issue a role_switch i always get an error "No connection". what 
  am i doing wrong. 

   i am doing these tests on an EBDK (revision DPY 091 129 R3A). 

   thank you for any help that you can provide. 

peace, mela. 

-- 
Sent through GMX FreeMail - http://www.gmx.net <http://www.gmx.net>  

- 
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in 
the body of a message to majordomo@xxxxxxx.com 

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com