[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] Multislave support



The openbt stack as it is now supports point-to-multipoint. We have tested it 
with 3 terminals connected as slave + 1 as master (our baseband supports 
scatternet). No other problem than the one reported on this list has been 
found.

Le Mardi 31 Juillet 2001 16:18, Zhiyuan Gao a ¨¦crit :
> Hi,
>
> in the June version of openbt stack, the experimental/btd.c mentioned:
>      .handles multi point ppp conections
> I wonder if this means the stack already support the p-to-mp connection?
> if so, is there anyone with this expeirence can give a hint?
>
> tony
>
> > [Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread
> > Index]
> >
> > RE: [bluetooth-dev] Multislave support
> >
> >
> >
> >       To: "'Khaled Labib'" <khaled@xxxxxxx.com>,
> > bluetooth-dev@xxxxxxx.com Subject: RE: [bluetooth-dev] Multislave support
> >       From: Mattias Ågren <mattias@xxxxxxx.com>
> >       Date: Tue, 22 May 2001 10:52:56 +0200
> >       Sender: owner-bluetooth-dev@xxxxxxx.com
> >
> >
> >
> > No, multipoint is not yet supported in the HCI emulator.
> > brgds
> > Mattias
> >
> > > -----Original Message-----
> > > From: Khaled Labib [mailto:khaled@xxxxxxx.com]
> > > Sent: den 21 maj 2001 23:15
> > > To: bluetooth-dev@xxxxxxx.com
> > > Subject: [bluetooth-dev] Multislave support
> > >
> > >
> > > Hi,
> > >
> > > I was wondering if the current stack running on Unix Sockets, rather
> > > than real hardware, would support multislave.
> > >
> > > Meaning can I start three devices on the same machine, such that for
> > > example one is the master and two are slaves ?
> > >
> > > Thank you,
> > >
> > > Khaled
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe
> > > bluetooth-dev" in
> > > the body of a message to majordomo@xxxxxxx.com
> >
> > -
> > To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
> > in the body of a message to majordomo@xxxxxxx.com
> >
> >
> >
> >       Prev by Date: RE: [bluetooth-dev] Where is the ipa_server?
> >       Next by Date: Re: [bluetooth-dev] Bluetooth qualification for an
> > opensource stack Prev by thread: [bluetooth-dev] Multislave support
> >       Next by thread: [bluetooth-dev] Re: sending more than one acl data
> > packet Index(es):
> >             Date
> >             Thread
>
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
> 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com