[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

SV: [bluetooth-dev] Connection with Axis 9010



As default the Axis9010 force M/S switching. To disable it change the ForceMSSwitch parameter in /etc/bt.conf.

Best Regards
Anders Johansson

-----Ursprungligt meddelande-----
Från: Choy Sok Sien [mailto:soksien.choy@xxxxxxx.com]
Skickat: den 5 september 2001 12:11
Till: bluetooth-dev@xxxxxxx.com
Ämne: [bluetooth-dev] Connection with Axis 9010


Hi all,
I'm getting the following from /proc/kmsg at the Axis 9010, can someone
pls tell me what it means?

:
<4>BT (driver) BTSETMSSWITCH : 1
<4>BT SYS: Force M/S switch set to 1
:
:
<4>BT SYS: lp_connect_rsp : early m/s switch
<4>lp_connect_cfm (neg), wake up flag not set
<4>BT SYS: process_event: CONNECTION_COMPLETE Unsupported Remote Feature
<4>BT SYS: ERROR :reset_hci_con_bd: Didn't find connection with con_hdl
39

I'm connecting to the Axis 9010 with a BT module that does not support a
role switch. It looks like the Master/slave switch is already enabled,
so why the "early m/s switch"?

Can anyone pls enlighten?? thks!!
 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com