[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] Binding between CSR-HW (USB) and driver bluetooth.o



From your information of usbview, one point should be noted: your CSR
doesn't show up as a Bluetooth device, which should have a device class of
0xE0.  And your firmware is pretty old, revision 0.01.  I guess you insmod
bluetooth.o by yourself.  But what I experienced is that, once I compiled it
as a module with the kernel.  It is automatically loaded right after I
plugged in the CSR module.

For more information, I am using Red Hat 7.1 and Axis 0.0.6 together with
Greg's patched bluetooth.c version 0.12.  Greg's patch seems solved the
"cmd_timeout" problem.  I can read the bluetooth address and inquire other
bluetooth devices.  But I haven't tried to make a connection for I've worn
off after a whole day's struggling.  I've gone through all the mails
concerning this issue.

Hope this help. Good luck,

Ivan.


----- Original Message -----
From: "Andreas Vedral" <andreas.r.vedral@xxxxxxx.de>
To: <bluetooth-dev@xxxxxxx.com>
Sent: Thursday, September 06, 2001 9:03 PM
Subject: [bluetooth-dev] Binding between CSR-HW (USB) and driver bluetooth.o


> Hi all,
>
> does anyone know, how to create the binding between the bluetooth modul
> (CSR-Casira) and the bluetooth.o driver.
>
> Is there a config file, where vendor- and product-id of the CSR-Module
> can write in?
>
> thanks,
> Andreas
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
in
> the body of a message to majordomo@xxxxxxx.com

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com