[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bluetooth-dev] SV: multipoint connection
I'm not sure how you intend to use the stack, but if you are going to use the stack in a device acting as Master in a piconet you need to enable M/S switch which will allow role switching when a remote device connects. This is done with CONFIG_BLUETOOTH_ENABLE_MSSWITCH. Of course your hardware must support multipoint.
> -----Ursprungligt meddelande-----
> Från: Namsu Lee [mailto:email@example.com]
> Skickat: den 27 september 2001 10:03
> Till: firstname.lastname@example.org
> Ämne: multipoint connection
> Thanks Anders.
> but you didn't mention how to do multipoint connection.
> Please tell me about it.
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to email@example.com