[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[bluetooth-dev] USB problem



Hi all,

UART operation works at 57600 kbps. Been unable to run it any other
baud.
The max baud achieved as this setting was 34 kbps. 

I havent been able to get USB running however. Could someone help out on
what might be wrong? Pasted below is the message log.

Also, my machine hangs when I remove the USB connector. Has anyone else
also faced the same problem?

Thanking you in advance.

regards,
Vinay



command used was
./btd -u /dev/ttyUB0 --cmdmode --server


log messages - 
-------------- 
Oct  3 17:19:33 salil kernel: hub.c: USB new device connect on bus1/2,
assigned
device number 2
Oct  3 17:19:33 salil kernel: usb.c: USB device 2 (vend/prod
0xbdb/0x1000) is not claimed by any active driver.
Oct  3 17:19:34 salil kernel: bluetooth.c: USB Bluetooth support
registered
Oct  3 17:19:34 salil kernel: usb.c: registered new driver bluetooth
Oct  3 17:19:34 salil kernel: bluetooth.c: USB Bluetooth converter
detected
Oct  3 17:19:34 salil kernel: bluetooth.c: Bluetooth converter now
attached to ttyUB0 (or usb/ttub/0 for devfs)

Oct  3 17:20:20 salil kernel: BT (driver) Now 1 open fd:s for ttyBTC
[btd]
Oct  3 17:20:20 salil kernel: BT (driver) bt_close on line 7
Oct  3 17:20:20 salil kernel: BT (driver) Unregistering tty on line 7
Oct  3 17:20:20 salil kernel: BT SYS: Reading buffer sizes in HW module
Oct  3 17:20:20 salil kernel: cmd_pkt from interrupt!
Oct  3 17:20:22 salil kernel: cmd_timeout: Timeout when waiting for
command response
Oct  3 17:20:22 salil kernel: BT SYS: Reading firmware info in HW module
Oct  3 17:20:22 salil kernel: cmd_pkt from interrupt!
Oct  3 17:20:24 salil kernel: cmd_timeout: Timeout when waiting for
command response
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com