[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] newbie questions



The kernel version is 2.4.2.  The firmware is 11.2 and is configured
for H4 at 115.2Kbps. 

How do I compile OpenBT for CSR?  I already tried `make
BLUETOOT_CONFIG_CSR=y`,
but the kernel message still say "Current HW: Ericsson".

TIA!

Joey

> -----Original Message-----
> From: valleluk [mailto:valleluk]On Behalf Of Lukas Valle
> Sent: Friday, October 05, 2001 5:30 PM
> To: Joey Legaspi
> Subject: Re: [bluetooth-dev] newbie questions
> 
> 
> Hi
> 
> We are working with CSR hardware (Casira) too, but with SuSE 7.2. At
> first we updated to the new Kernel 2.4.10. Then we updated the CSR
> firmware to the newest version with HCI support. Befor you update the
> firmware, make a dump from the old one, because we couldn't change the
> settings on the casira box after update. With the old firmware we made
> all settings for H4 over uart. Then we updated again. After compiling
> openbt for CSR with H4 we could now work with the openbt Stack. 
> 
> Luki and Dejan
> 
> Joey Legaspi wrote:
> > 
> > Hi!
> > 
> > This is my first time with this protocol stack, so
> > I apologize in advance for the "dumb" questions and
> > please bear with me. :)
> > 
> > I'm using CSR hardware on a Redhat 7.1 box.
> > I followed the steps described in the README file but
> > I still get the following:
> > 
> > ----
> > 
> > [root@xxxxxxx./btd -u /dev/ttyS0 -b
> > /dev/ttyBT0 -m -e 0
> > Bluetooth Control Application
> > -----------------------------
> > Running as server
> > Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 115200
> > baud
> > Registered bluetooth line discipline on /dev/ttyS0
> > Init stack
> > Init stack: Operation not permitted
> > 
> > ----
> > 
> > What am I doing wrong?
> > 
> > Also, with btduser:
> > 
> > ----
> > 
> > root] btduser -u /dev/ttyS0 -b /dev/ttyBT0 -m -e 0
> > Bluetooth Control Application
> > -----------------------------
> > Running as server
> > Running stack in user mode
> > Physdev /dev/ttyS0, btdev (not used), speed 115200
> > baud
> > sdp_parser.c::SDP Server starting
> > sdp_parser.c::Opening server socket /tmp/sdp_sock
> > sdp_parser.c::SDP Server listens...
> > Init stack
> > Initiating read thread
> > BT SYS: Initialising Bluetooth Stack
> > BT SYS: Initialising HCI
> > BT SYS: HCI emulator off
> > BT SYS: Initialising HCI inbuffers [800]
> > BT SYS: Reading buffer sizes in HW module
> > 
> > ----
> > 
> > >From what I've read in the README, it should already
> > be able to accept commands (inq, setbd, readbd, etc).
> > But nothing happens when I type any of the commands
> > And when Ctrl-C is pressed, I get this:
> > 
> > waitpid sdp server: No child processes
> > 
> > What is going on here?
> > 
> > Any inputs will be greatly appreciated.
> > 
> > TIA!
> > 
> > -joey
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > NEW from Yahoo! GeoCities - quick and easy web site 
> hosting, just $8.95/month.
> > http://geocities.yahoo.com/ps/info1
> > -
> > To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> > the body of a message to majordomo@xxxxxxx.com
> 
> Content Security by MailMarshal
> 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com