[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] newbie questions



Hi

Try the following changes:

openbt/linux/include/linux/bluetooth/btconfig.h
Line 62 & 64
#define CONFIG_BLUETOOTH_CSR
#undef CONFIG_BLUETOOTH_ERICSSON

Luki and Dejan


"Joey J. Legaspi" wrote:
> 
> The kernel version is 2.4.2.  The firmware is 11.2 and is configured
> for H4 at 115.2Kbps.
> 
> How do I compile OpenBT for CSR?  I already tried `make
> BLUETOOT_CONFIG_CSR=y`,
> but the kernel message still say "Current HW: Ericsson".
> 
> TIA!
> 
> Joey
> 
> > -----Original Message-----
> > From: valleluk [mailto:valleluk]On Behalf Of Lukas Valle
> > Sent: Friday, October 05, 2001 5:30 PM
> > To: Joey Legaspi
> > Subject: Re: [bluetooth-dev] newbie questions
> >
> >
> > Hi
> >
> > We are working with CSR hardware (Casira) too, but with SuSE 7.2. At
> > first we updated to the new Kernel 2.4.10. Then we updated the CSR
> > firmware to the newest version with HCI support. Befor you update the
> > firmware, make a dump from the old one, because we couldn't change the
> > settings on the casira box after update. With the old firmware we made
> > all settings for H4 over uart. Then we updated again. After compiling
> > openbt for CSR with H4 we could now work with the openbt Stack.
> >
> > Luki and Dejan
> >
> > Joey Legaspi wrote:
> > >
> > > Hi!
> > >
> > > This is my first time with this protocol stack, so
> > > I apologize in advance for the "dumb" questions and
> > > please bear with me. :)
> > >
> > > I'm using CSR hardware on a Redhat 7.1 box.
> > > I followed the steps described in the README file but
> > > I still get the following:
> > >
> > > ----
> > >
> > > [root@xxxxxxx./btd -u /dev/ttyS0 -b
> > > /dev/ttyBT0 -m -e 0
> > > Bluetooth Control Application
> > > -----------------------------
> > > Running as server
> > > Physdev /dev/ttyS0, btdev /dev/ttyBT0, speed 115200
> > > baud
> > > Registered bluetooth line discipline on /dev/ttyS0
> > > Init stack
> > > Init stack: Operation not permitted
> > >
> > > ----
> > >
> > > What am I doing wrong?
> > >
> > > Also, with btduser:
> > >
> > > ----
> > >
> > > root] btduser -u /dev/ttyS0 -b /dev/ttyBT0 -m -e 0
> > > Bluetooth Control Application
> > > -----------------------------
> > > Running as server
> > > Running stack in user mode
> > > Physdev /dev/ttyS0, btdev (not used), speed 115200
> > > baud
> > > sdp_parser.c::SDP Server starting
> > > sdp_parser.c::Opening server socket /tmp/sdp_sock
> > > sdp_parser.c::SDP Server listens...
> > > Init stack
> > > Initiating read thread
> > > BT SYS: Initialising Bluetooth Stack
> > > BT SYS: Initialising HCI
> > > BT SYS: HCI emulator off
> > > BT SYS: Initialising HCI inbuffers [800]
> > > BT SYS: Reading buffer sizes in HW module
> > >
> > > ----
> > >
> > > >From what I've read in the README, it should already
> > > be able to accept commands (inq, setbd, readbd, etc).
> > > But nothing happens when I type any of the commands
> > > And when Ctrl-C is pressed, I get this:
> > >
> > > waitpid sdp server: No child processes
> > >
> > > What is going on here?
> > >
> > > Any inputs will be greatly appreciated.
> > >
> > > TIA!
> > >
> > > -joey
> > >
> > > __________________________________________________
> > > Do You Yahoo!?
> > > NEW from Yahoo! GeoCities - quick and easy web site
> > hosting, just $8.95/month.
> > > http://geocities.yahoo.com/ps/info1
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe
> > bluetooth-dev" in
> > > the body of a message to majordomo@xxxxxxx.com
> >
> > Content Security by MailMarshal
> >

Content Security by MailMarshal
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com