[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RE [bluetooth-dev] re RFComm connection problem under 802.11



Hi..
I have made the CONFIG_BLUETOOTH_USE_SECURITY_MANAGER disable,but it seem to
be useless.
I have turned on debug message and the message is the following .

Nov 26 22:07:56 ailp3 btd: Opening dev /dev/ttyUB0
Nov 26 22:07:56 ailp3 kernel: BT (driver) bt_open on line 7
Nov 26 22:07:56 ailp3 kernel: BT (driver) Registering tty on line 7 (btd)
Nov 26 22:07:56 ailp3 kernel: BT (driver) Now 1 open fd:s for ttyBTC [btd]
Nov 26 22:07:56 ailp3 kernel: BT (driver) bt_close on line 7
Nov 26 22:07:56 ailp3 kernel: BT (driver) Unregistering tty on line 7
Nov 26 22:07:56 ailp3 kernel: BT (ldisc) bt_tty_open
Nov 26 22:07:56 ailp3 kernel: BT SYS: Setting BT driver to use serial tty
Nov 26 22:07:56 ailp3 btd: Opening dev /dev/ttyBTC
Nov 26 22:07:56 ailp3 kernel: BT (driver) bt_open on line 7
Nov 26 22:07:56 ailp3 kernel: BT (driver) Registering tty on line 7 (btd)
Nov 26 22:07:56 ailp3 kernel: BT (driver) Now 1 open fd:s for ttyBTC [btd]
Nov 26 22:07:56 ailp3 kernel: BT (driver) bt_flush_buffer, ignored
Nov 26 22:07:56 ailp3 kernel: BT SYS: Initialising Bluetooth Stack
Nov 26 22:07:56 ailp3 kernel: BT SYS: Current HW: Ericsson
Nov 26 22:07:56 ailp3 kernel: BT SYS: Initialising BTMEM [2500 bytes]
Nov 26 22:07:56 ailp3 kernel: BT SYS: Initialising HCI
Nov 26 22:07:56 ailp3 kernel: BT SYS: HCI emulator off
Nov 26 22:07:56 ailp3 kernel: BT SYS: Initialising HCI inbuffers [800]
Nov 26 22:07:56 ailp3 kernel: HCI: init_cmd_buf: Initializing
Nov 26 22:07:56 ailp3 kernel: BT SYS: Reading buffer sizes in HW module
Nov 26 22:07:56 ailp3 kernel: HCI: hci_read_buffer_size
Nov 26 22:07:56 ailp3 kernel: HCI: start_cmd_timer
Nov 26 22:07:56 ailp3 kernel: HCI: insert_cmd
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: send_cmd_queue:  (4):
Nov 26 22:07:56 ailp3 kernel: 0x01 0x05 0x10 0x00
Nov 26 22:07:56 ailp3 kernel: BT DATA <--|X|      4
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:56 ailp3 kernel: BT DATA -->|X|     14
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: hci_receive_data:  (14):
Nov 26 22:07:56 ailp3 kernel: 0x04 0x0e 0x0b 0x01 0x05 0x10 0x00 0xa0 0x02
0xff 0x0a 0x00 0xff 0x00
Nov 26 22:07:56 ailp3 kernel: hci_receive_data: hci-14
Nov 26 22:07:56 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:07:56 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:07:56 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: process_event (11):
Nov 26 22:07:56 ailp3 kernel: 0x01 0x05 0x10 0x00 0xa0 0x02 0xff 0x0a 0x00
0xff 0x00
Nov 26 22:07:56 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:07:56 ailp3 kernel: HCI: <CC>
Nov 26 22:07:56 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:07:56 ailp3 kernel: HCI: process_return_param: READ_BUFFER_SIZE
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: HW module contains...
Nov 26 22:07:56 ailp3 kernel: 10 ACL buffers at 672 bytes
Nov 26 22:07:56 ailp3 kernel: 255 SCO buffers at 255 bytes
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:56 ailp3 kernel: BT SYS: Reading firmware info in HW module
Nov 26 22:07:56 ailp3 kernel: HCI: hci_read_firmware_rev_info [Ericsson]
Nov 26 22:07:56 ailp3 kernel: HCI: start_cmd_timer
Nov 26 22:07:56 ailp3 kernel: HCI: insert_cmd
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: send_cmd_queue:  (4):
Nov 26 22:07:56 ailp3 kernel: 0x01 0x0f 0xfc 0x00
Nov 26 22:07:56 ailp3 kernel: BT DATA <--|X|      4
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:56 ailp3 kernel: BT DATA -->|X|    108
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: hci_receive_data:  (108):
Nov 26 22:07:56 ailp3 kernel: 0x04 0x0e 0x69 0x01 0x0f 0xfc 0x00 0x0d 0x0a
0x20 0x47 0x65 0x6e 0x65 0x72 0x61
Nov 26 22:07:56 ailp3 kernel: 0x74 0x65 0x64 0x3a 0x20 0x32 0x30 0x30 0x31
0x2d 0x30 0x31 0x2d 0x31 0x37 0x20
Nov 26 22:07:56 ailp3 kernel: 0x31 0x32 0x3a 0x33 0x37 0x0d 0x0a 0x20 0x43
0x6f 0x6d 0x6d 0x65 0x6e 0x74 0x3a
Nov 26 22:07:56 ailp3 kernel: 0x20 0x43 0x58 0x43 0x20 0x31 0x32 0x35 0x20
0x32 0x34 0x34 0x20 0x50 0x31 0x33
Nov 26 22:07:56 ailp3 kernel: 0x41 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00
Nov 26 22:07:56 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00
Nov 26 22:07:56 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00
Nov 26 22:07:56 ailp3 kernel: hci_receive_data: hci-108
Nov 26 22:07:56 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:07:56 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:07:56 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: process_event (105):
Nov 26 22:07:56 ailp3 kernel: 0x01 0x0f 0xfc 0x00 0x0d 0x0a 0x20 0x47 0x65
0x6e 0x65 0x72 0x61 0x74 0x65 0x64
Nov 26 22:07:56 ailp3 kernel: 0x3a 0x20 0x32 0x30 0x30 0x31 0x2d 0x30 0x31
0x2d 0x31 0x37 0x20 0x31 0x32 0x3a
Nov 26 22:07:56 ailp3 kernel: 0x33 0x37 0x0d 0x0a 0x20 0x43 0x6f 0x6d 0x6d
0x65 0x6e 0x74 0x3a 0x20 0x43 0x58
Nov 26 22:07:56 ailp3 kernel: 0x43 0x20 0x31 0x32 0x35 0x20 0x32 0x34 0x34
0x20 0x50 0x31 0x33 0x41 0x00 0x00
Nov 26 22:07:56 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00
Nov 26 22:07:56 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00
Nov 26 22:07:56 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
Nov 26 22:07:56 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:07:56 ailp3 kernel: HCI: <CC>
Nov 26 22:07:56 ailp3 kernel: HCI: process_return_param: MANUFACTURER_SPEC
Nov 26 22:07:56 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:07:56 ailp3 kernel: Ericsson HW revision info: ^M
Nov 26 22:07:56 ailp3 kernel:  Generated: 2001-01-17 12:37^M
Nov 26 22:07:56 ailp3 kernel:  Comment: CXC 125 244 P13A
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:56 ailp3 kernel: BT SYS: Host flow control not enabled
Nov 26 22:07:56 ailp3 kernel: BT SYS: M/S switch disabled
Nov 26 22:07:56 ailp3 kernel: BT SYS: Force M/S switch set to 0
Nov 26 22:07:56 ailp3 kernel: BT SYS: Initialising L2CAP
Nov 26 22:07:56 ailp3 kernel:     L2CAP init_flow
Nov 26 22:07:56 ailp3 kernel: HCI: hci_read_local_bd
Nov 26 22:07:56 ailp3 kernel: HCI: start_cmd_timer
Nov 26 22:07:56 ailp3 kernel: HCI: insert_cmd
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:56 ailp3 kernel:
Nov 26 22:07:56 ailp3 kernel: send_cmd_queue:  (4):
Nov 26 22:07:56 ailp3 kernel: 0x01 0x09 0x10 0x00
Nov 26 22:07:56 ailp3 kernel: BT DATA <--|X|      4
Nov 26 22:07:56 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:57 ailp3 kernel: BT DATA -->|X|     13
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: hci_receive_data:  (13):
Nov 26 22:07:57 ailp3 kernel: 0x04 0x0e 0x0a 0x01 0x09 0x10 0x00 0xc2 0xf8
0x13 0x37 0x80 0x00
Nov 26 22:07:57 ailp3 kernel: hci_receive_data: hci-13
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: process_event (10):
Nov 26 22:07:57 ailp3 kernel: 0x01 0x09 0x10 0x00 0xc2 0xf8 0x13 0x37 0x80
0x00
Nov 26 22:07:57 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:07:57 ailp3 kernel: HCI: <CC>
Nov 26 22:07:57 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:07:57 ailp3 kernel: HCI: process_return_param: READ_BD_ADDR
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: process_return_param: READ_BD_ADDR :  (6):
Nov 26 22:07:57 ailp3 kernel: 0xc2 0xf8 0x13 0x37 0x80 0x00
Nov 26 22:07:57 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:57 ailp3 kernel: BT SYS: Local bd [00:80:37:13:f8:c2]
Nov 26 22:07:57 ailp3 kernel: BT SYS: Initialising RFCOMM
Nov 26 22:07:57 ailp3 kernel:           RFCOMM rfcomm_reset_con: line 0
Nov 26 22:07:57 ailp3 kernel:           RFCOMM rfcomm_reset_con: line 1
Nov 26 22:07:57 ailp3 kernel:           RFCOMM rfcomm_reset_con: line 2
Nov 26 22:07:57 ailp3 kernel:           RFCOMM rfcomm_reset_con: line 3
Nov 26 22:07:57 ailp3 kernel:           RFCOMM rfcomm_reset_con: line 4
Nov 26 22:07:57 ailp3 kernel:           RFCOMM rfcomm_reset_con: line 5
Nov 26 22:07:57 ailp3 kernel:           RFCOMM rfcomm_reset_con: line 6
Nov 26 22:07:57 ailp3 kernel: BT SYS: Initialising SDP
Nov 26 22:07:57 ailp3 kernel: BT SYS: Init SDP as server
Nov 26 22:07:57 ailp3 kernel: BT SYS: Initialising TCS
Nov 26 22:07:57 ailp3 kernel: BT SYS: Initialising TEST
Nov 26 22:07:57 ailp3 kernel: BT (driver) bt_ioctl: HCIWRITECLASSOFDEVICE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_write_class_of_device: Service class
0x10, major:0x3, minor:0x0
Nov 26 22:07:57 ailp3 kernel: HCI: hci_write_class_of_device: 2:3:0
Nov 26 22:07:57 ailp3 kernel: HCI: start_cmd_timer
Nov 26 22:07:57 ailp3 kernel: HCI: insert_cmd
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: send_cmd_queue:  (7):
Nov 26 22:07:57 ailp3 kernel: 0x01 0x24 0x0c 0x03 0x00 0x03 0x02
Nov 26 22:07:57 ailp3 kernel: BT DATA <--|X|      7
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:57 ailp3 kernel: BT DATA -->|X|      7
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: hci_receive_data:  (7):
Nov 26 22:07:57 ailp3 kernel: 0x04 0x0e 0x04 0x01 0x24 0x0c 0x00
Nov 26 22:07:57 ailp3 kernel: hci_receive_data: hci-7
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: process_event (4):
Nov 26 22:07:57 ailp3 kernel: 0x01 0x24 0x0c 0x00
Nov 26 22:07:57 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:07:57 ailp3 kernel: HCI: <CC>
Nov 26 22:07:57 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:07:57 ailp3 kernel: HCI: process_return_param:
WRITE_CLASS_OF_DEVICE
Nov 26 22:07:57 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:57 ailp3 kernel: BT (driver) bt_ioctl: HCISETLOCALNAME
Nov 26 22:07:57 ailp3 kernel: HCI: hci_change_local_name: New name:
ailp3.(none)
Nov 26 22:07:57 ailp3 kernel: HCI: start_cmd_timer
Nov 26 22:07:57 ailp3 kernel: HCI: insert_cmd
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: send_cmd_queue:  (252):
Nov 26 22:07:57 ailp3 kernel: 0x01 0x13 0x0c 0xf8 0x61 0x69 0x6c 0x70 0x33
0x2e 0x28 0x6e 0x6f 0x6e 0x65 0x29
Nov 26 22:07:57 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00 0x00 0x00 0x00 0x00
Nov 26 22:07:57 ailp3 last message repeated 13 times
Nov 26 22:07:57 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00 0x00
0x00 0x00 0x00
Nov 26 22:07:57 ailp3 kernel: BT DATA <--|X|    252
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:57 ailp3 kernel: BT DATA -->|X|      7
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: hci_receive_data:  (7):
Nov 26 22:07:57 ailp3 kernel: 0x04 0x0e 0x04 0x01 0x13 0x0c 0x00
Nov 26 22:07:57 ailp3 kernel: hci_receive_data: hci-7
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: process_event (4):
Nov 26 22:07:57 ailp3 kernel: 0x01 0x13 0x0c 0x00
Nov 26 22:07:57 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:07:57 ailp3 kernel: HCI: <CC>
Nov 26 22:07:57 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:07:57 ailp3 kernel: HCI: process_return_param: CHANGE_LOCAL_NAME
Nov 26 22:07:57 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:57 ailp3 kernel: BT (driver) Setting write scan enable : [0x3]
Nov 26 22:07:57 ailp3 kernel: HCI: hci_write_scan_enable: enable 3
Nov 26 22:07:57 ailp3 kernel: HCI: start_cmd_timer
Nov 26 22:07:57 ailp3 kernel: HCI: insert_cmd
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: send_cmd_queue:  (5):
Nov 26 22:07:57 ailp3 kernel: 0x01 0x1a 0x0c 0x01 0x03
Nov 26 22:07:57 ailp3 kernel: BT DATA <--|X|      5
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:57 ailp3 kernel: BT DATA -->|X|      7
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: hci_receive_data:  (7):
Nov 26 22:07:57 ailp3 kernel: 0x04 0x0e 0x04 0x01 0x1a 0x0c 0x00
Nov 26 22:07:57 ailp3 kernel: hci_receive_data: hci-7
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:07:57 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:07:57 ailp3 kernel:
Nov 26 22:07:57 ailp3 kernel: process_event (4):
Nov 26 22:07:57 ailp3 kernel: 0x01 0x1a 0x0c 0x00
Nov 26 22:07:57 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:07:57 ailp3 kernel: HCI: <CC>
Nov 26 22:07:57 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:07:57 ailp3 kernel: HCI: process_return_param: WRITE_SCAN_ENABLE
Nov 26 22:07:57 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:57 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:58 ailp3 kernel: BT (driver) bt_ioctl: HCISET_EVENT_FILTER
Nov 26 22:07:58 ailp3 kernel: HCI: hci_set_event_filter
Nov 26 22:07:58 ailp3 kernel: HCI: start_cmd_timer
Nov 26 22:07:58 ailp3 kernel: HCI: insert_cmd
Nov 26 22:07:58 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:58 ailp3 kernel:
Nov 26 22:07:58 ailp3 kernel: send_cmd_queue:  (7):
Nov 26 22:07:58 ailp3 kernel: 0x01 0x05 0x0c 0x03 0x02 0x00 0x01
Nov 26 22:07:58 ailp3 kernel: BT DATA <--|X|      7
Nov 26 22:07:58 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:58 ailp3 kernel: BT DATA -->|X|      7
Nov 26 22:07:58 ailp3 kernel:
Nov 26 22:07:58 ailp3 kernel: hci_receive_data:  (7):
Nov 26 22:07:58 ailp3 kernel: 0x04 0x0e 0x04 0x01 0x05 0x0c 0x00
Nov 26 22:07:58 ailp3 kernel: hci_receive_data: hci-7
Nov 26 22:07:58 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:07:58 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:07:58 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:07:58 ailp3 kernel:
Nov 26 22:07:58 ailp3 kernel: process_event (4):
Nov 26 22:07:58 ailp3 kernel: 0x01 0x05 0x0c 0x00
Nov 26 22:07:58 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:07:58 ailp3 kernel: HCI: <CC>
Nov 26 22:07:58 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:07:58 ailp3 kernel: HCI: process_return_param: SET_EVENT_FILTER
Nov 26 22:07:58 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:07:58 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:07:58 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:07:59 ailp3 kernel: BT (driver) bt_ioctl: Setting baudrate in host
controller to 115200
Nov 26 22:07:59 ailp3 kernel: HCI: hci_set_baudrate [Ericsson] (115200 baud)
Nov 26 22:07:59 ailp3 kernel: BT DATA <--|X|      5
Nov 26 22:07:59 ailp3 kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl
0x5401 to n_tty line disc
Nov 26 22:07:59 ailp3 kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl
0x5402 to n_tty line disc
Nov 26 22:07:59 ailp3 kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl
0x5401 to n_tty line disc
Nov 26 22:07:59 ailp3 kernel: BT (ldisc) bt_tty_ioctl: forwarding ioctl
0x540b to n_tty line disc
Nov 26 22:08:00 ailp3 kernel: BT DATA -->|X|      7
Nov 26 22:08:00 ailp3 kernel:
Nov 26 22:08:00 ailp3 kernel: hci_receive_data:  (7):
Nov 26 22:08:00 ailp3 kernel: 0x04 0x0e 0x04 0x01 0x09 0xfc 0x00
Nov 26 22:08:00 ailp3 kernel: hci_receive_data: hci-7
Nov 26 22:08:00 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:00 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:08:00 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:08:00 ailp3 kernel:
Nov 26 22:08:00 ailp3 kernel: process_event (4):
Nov 26 22:08:00 ailp3 kernel: 0x01 0x09 0xfc 0x00
Nov 26 22:08:00 ailp3 kernel: HCI: process_event: COMMAND_COMPLETE
Nov 26 22:08:00 ailp3 kernel: HCI: <CC>
Nov 26 22:08:00 ailp3 kernel: HCI: process_return_param: MANUFACTURER_SPEC
Nov 26 22:08:00 ailp3 kernel: HCI: process_vendor_return_param [Ericsson]
baudrate set
Nov 26 22:08:00 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:08:00 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:08:00 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:08:04 ailp3 kernel: BT (driver) bt_ioctl: BTCONNECT
Nov 26 22:08:04 ailp3 kernel: BT (driver) bt_connect : Connecting srv ch 2
on line 0
Nov 26 22:08:04 ailp3 kernel:           RFCOMM rfcomm_connect_req: server
channel:2, line:0
Nov 26 22:08:04 ailp3 kernel:     L2CAP get_con: look for connections in
state ANY_STATE (7)
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: get_con: look for bd :  (6):
Nov 26 22:08:04 ailp3 kernel: 0xfb 0xf9 0x13 0x37 0x80 0x00
Nov 26 22:08:04 ailp3 kernel:     L2CAP get_con: connection not found
Nov 26 22:08:04 ailp3 kernel:     L2CAP get_lcon: lcid 64 con_list.count = 0
Nov 26 22:08:04 ailp3 kernel:     L2CAP get_lcon: connection lcid : 64 not
found
Nov 26 22:08:04 ailp3 kernel:     L2CAP create_con: rcid 0
Nov 26 22:08:04 ailp3 kernel:     L2CAP init_flow
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: bd (6):
Nov 26 22:08:04 ailp3 kernel: 0xfb 0xf9 0x13 0x37 0x80 0x00
Nov 26 22:08:04 ailp3 kernel: show_con: insert_con (64:0) [CLOSED] [RFCOMM]
r_mtu[672] C[yes] link_up[no]
Nov 26 22:08:04 ailp3 kernel:     L2CAP insert_con: now 1 connections
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: lp_connect_req: bd address is:  (6):
Nov 26 22:08:04 ailp3 kernel: 0xfb 0xf9 0x13 0x37 0x80 0x00
Nov 26 22:08:04 ailp3 kernel:     L2CAP get_con: look for connections in
state ANY_STATE (7)
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: get_con: look for bd :  (6):
Nov 26 22:08:04 ailp3 kernel: 0xfb 0xf9 0x13 0x37 0x80 0x00
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: get_con: found bd  (6):
Nov 26 22:08:04 ailp3 kernel: 0xfb 0xf9 0x13 0x37 0x80 0x00
Nov 26 22:08:04 ailp3 kernel: HCI: create_connection
Nov 26 22:08:04 ailp3 kernel: HCI: insert_cmd
Nov 26 22:08:04 ailp3 kernel: l2ca_connect_req: wait baseband, sleep on wq
0xc0f66a4c
Nov 26 22:08:04 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: send_cmd_queue:  (17):
Nov 26 22:08:04 ailp3 kernel: 0x01 0x05 0x04 0x0d 0xfb 0xf9 0x13 0x37 0x80
0x00 0x18 0xcc 0x00 0x00 0x00 0x00
Nov 26 22:08:04 ailp3 kernel: 0x00
Nov 26 22:08:04 ailp3 kernel: BT DATA <--|X|     17
Nov 26 22:08:04 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:08:04 ailp3 kernel: BT DATA -->|X|      7
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: hci_receive_data:  (7):
Nov 26 22:08:04 ailp3 kernel: 0x04 0x0f 0x04 0x00 0x01 0x05 0x04
Nov 26 22:08:04 ailp3 kernel: hci_receive_data: hci-7
Nov 26 22:08:04 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:04 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:08:04 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: process_event (4):
Nov 26 22:08:04 ailp3 kernel: 0x00 0x01 0x05 0x04
Nov 26 22:08:04 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:08:04 ailp3 kernel: HCI: process_event: COMMAND_STATUS
Nov 26 22:08:04 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=1
Nov 26 22:08:04 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:08:04 ailp3 kernel: HCI: send_cmd_queue: end : 0 cmds left in
queue
Nov 26 22:08:04 ailp3 kernel: BT DATA -->|X|     14
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: hci_receive_data:  (14):
Nov 26 22:08:04 ailp3 kernel: 0x04 0x03 0x0b 0x00 0x01 0x00 0xfb 0xf9 0x13
0x37 0x80 0x00 0x01 0x00
Nov 26 22:08:04 ailp3 kernel: hci_receive_data: hci-14
Nov 26 22:08:04 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:04 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:08:04 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: process_event (11):
Nov 26 22:08:04 ailp3 kernel: 0x00 0x01 0x00 0xfb 0xf9 0x13 0x37 0x80 0x00
0x01 0x00
Nov 26 22:08:04 ailp3 kernel: HCI: process_event: CONNECTION_COMPLETE:
Success!
Nov 26 22:08:04 ailp3 kernel:     L2CAP get_con: look for connections in
state CLOSED (0)
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: get_con: look for bd :  (6):
Nov 26 22:08:04 ailp3 kernel: 0xfb 0xf9 0x13 0x37 0x80 0x00
Nov 26 22:08:04 ailp3 kernel:
Nov 26 22:08:04 ailp3 kernel: get_con: con_list bd  (6):
Nov 26 22:08:04 ailp3 kernel: 0xfb 0xf9 0x13 0x37 0x80 0x00
Nov 26 22:08:04 ailp3 kernel: lp_connect_cfm (pos), wake up wq 0xc0f66a4c
Nov 26 22:08:04 ailp3 kernel: lp_connect_cfm, wake up flag not set
Nov 26 22:08:04 ailp3 kernel: BT SYS: process_event: ACL link is up
Nov 26 22:08:04 ailp3 kernel: HCI: change_connection_packet_type: for
connnection handle 0x1
Nov 26 22:08:04 ailp3 kernel: HCI: insert_cmd
Nov 26 22:08:04 ailp3 kernel: HCI: remote_name_request:  for bd address
0x00:80:37:13:f9:fb
Nov 26 22:08:05 ailp3 kernel: HCI: insert_cmd
Nov 26 22:08:05 ailp3 kernel: HCI: insert_cmd: WRAP
Nov 26 22:08:05 ailp3 kernel: HCI: write_link_policy_settings
Nov 26 22:08:05 ailp3 kernel: HCI: insert_cmd
Nov 26 22:08:05 ailp3 kernel: HCI: hci_update_load_factor: Load factor
changed from 0 to 1
Nov 26 22:08:05 ailp3 kernel: HCI: insert_cmd
Nov 26 22:08:05 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=1
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: send_cmd_queue:  (8):
Nov 26 22:08:05 ailp3 kernel: 0x01 0x0f 0x04 0x04 0x01 0x00 0x00 0xcc
Nov 26 22:08:05 ailp3 kernel: BT DATA <--|X|      8
Nov 26 22:08:05 ailp3 kernel: HCI: send_cmd_queue: end : 3 cmds left in
queue
Nov 26 22:08:05 ailp3 kernel: l2ca_connect_req: wait baseband, woke up !
Nov 26 22:08:05 ailp3 kernel: HCI: hci_send_data: 12 bytes
Nov 26 22:08:05 ailp3 kernel: l2ca_connect_req: wait rsp, sleep on wq
0xc0f66a4c
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_data_task: 12 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_data_task: 12 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: send 12 bytes (excl HCI
header) out of 12
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: There are 5 bytes space
for the headers
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: send_acl_packet:  (17):
Nov 26 22:08:05 ailp3 kernel: 0x02 0x01 0x20 0x0c 0x00 0x08 0x00 0x01 0x00
0x02 0x01 0x04 0x00 0x03 0x00 0x40
Nov 26 22:08:05 ailp3 kernel: 0x00
Nov 26 22:08:05 ailp3 kernel: BT DATA <--|X|     17
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: now c = 12
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: unsubscribing tx_buf.
Nov 26 22:08:05 ailp3 kernel: HCI: <--0 (9)
Nov 26 22:08:05 ailp3 kernel: BT DATA -->|X|      7
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: hci_receive_data:  (7):
Nov 26 22:08:05 ailp3 kernel: 0x04 0x0f 0x04 0x00 0x00 0x0f 0x04
Nov 26 22:08:05 ailp3 kernel: hci_receive_data: hci-7
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: process_event (4):
Nov 26 22:08:05 ailp3 kernel: 0x00 0x00 0x0f 0x04
Nov 26 22:08:05 ailp3 kernel: HCI: release_cmd_timer
Nov 26 22:08:05 ailp3 kernel: HCI: process_event: COMMAND_STATUS
Nov 26 22:08:05 ailp3 kernel: HCI: update_nhcp: Num_HCI_Command_Packets=0
Nov 26 22:08:05 ailp3 kernel: HCI: send_cmd_queue: start:
Num_HCI_Command_Packets=0
Nov 26 22:08:05 ailp3 kernel: HCI: send_cmd_queue: end : 3 cmds left in
queue
Nov 26 22:08:05 ailp3 kernel: BT DATA -->|X|     21
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: hci_receive_data:  (21):
Nov 26 22:08:05 ailp3 kernel: 0x02 0x01 0x20 0x10 0x00 0x0c 0x00 0x01 0x00
0x03 0x01 0x08 0x00 0x40 0x00 0x40
Nov 26 22:08:05 ailp3 kernel: 0x00 0x00 0x00 0x00 0x00
Nov 26 22:08:05 ailp3 kernel: hci_receive_data: hci-21
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_ACL_HDR
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: New frame
Nov 26 22:08:05 ailp3 kernel: HCI: get_free_inbuffer: inbuffer 0 was free
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_ACL_DATA
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: in_buf->count = 16
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: Copied 16 bytes into
inbuffer
Nov 26 22:08:05 ailp3 kernel: HCI: process_acl_data: in_buf->count:16,
in_buf->l2cap_len:0
Nov 26 22:08:05 ailp3 kernel:     L2CAP get_lcon: lcid 64 con_list.count = 1
Nov 26 22:08:05 ailp3 kernel: l2cap con rsp, wake up wq 0xc0f66a4c
Nov 26 22:08:05 ailp3 kernel:           RFCOMM rfcomm_connect_cfm: status 0
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: l2cap options:  (0):
Nov 26 22:08:05 ailp3 kernel: HCI: hci_send_data: 12 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: hci_clear_buffer
Nov 26 22:08:05 ailp3 kernel: HCI: get_inbuffer: Found inbuffer for hci_hdl
1 c88df614
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_data_task: 12 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_data_task: 12 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: send 12 bytes (excl HCI
header) out of 12
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: There are 5 bytes space
for the headers
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: send_acl_packet:  (17):
Nov 26 22:08:05 ailp3 kernel: 0x02 0x01 0x20 0x0c 0x00 0x08 0x00 0x01 0x00
0x04 0x02 0x04 0x00 0x40 0x00 0x00
Nov 26 22:08:05 ailp3 kernel: 0x00
Nov 26 22:08:05 ailp3 kernel: BT DATA <--|X|     17
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: now c = 12
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: unsubscribing tx_buf.
Nov 26 22:08:05 ailp3 kernel: HCI: <--0 (8)
Nov 26 22:08:05 ailp3 kernel: l2ca_connect_req: wait rsp, woke up !
Nov 26 22:08:05 ailp3 kernel: BT DATA -->|X|      6
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: hci_receive_data:  (6):
Nov 26 22:08:05 ailp3 kernel: 0x04 0x1b 0x03 0x01 0x00 0x03
Nov 26 22:08:05 ailp3 kernel: hci_receive_data: hci-6
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_TYPE
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_EVENT_LENGTH
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: process_event (3):
Nov 26 22:08:05 ailp3 kernel: 0x01 0x00 0x03
Nov 26 22:08:05 ailp3 kernel: HCI: process_event: MAX_SLOTS_CHANGE to 3
Nov 26 22:08:05 ailp3 kernel: BT DATA -->|X|     19
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: hci_receive_data:  (19):
Nov 26 22:08:05 ailp3 kernel: 0x02 0x01 0x20 0x0e 0x00 0x0a 0x00 0x01 0x00
0x05 0x02 0x06 0x00 0x40 0x00 0x00
Nov 26 22:08:05 ailp3 kernel: 0x00 0x00 0x00
Nov 26 22:08:05 ailp3 kernel: hci_receive_data: hci-19
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_ACL_HDR
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: New frame
Nov 26 22:08:05 ailp3 kernel: HCI: get_free_inbuffer: inbuffer 0 was free
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_ACL_DATA
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: in_buf->count = 14
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: Copied 14 bytes into
inbuffer
Nov 26 22:08:05 ailp3 kernel: HCI: process_acl_data: in_buf->count:14,
in_buf->l2cap_len:0
Nov 26 22:08:05 ailp3 kernel:     L2CAP get_lcon: lcid 64 con_list.count = 1
Nov 26 22:08:05 ailp3 kernel: HCI: hci_clear_buffer
Nov 26 22:08:05 ailp3 kernel: HCI: get_inbuffer: Found inbuffer for hci_hdl
1 c88df614
Nov 26 22:08:05 ailp3 kernel: BT DATA -->|X|     17
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: hci_receive_data:  (17):
Nov 26 22:08:05 ailp3 kernel: 0x02 0x01 0x20 0x0c 0x00 0x08 0x00 0x01 0x00
0x04 0x01 0x04 0x00 0x40 0x00 0x00
Nov 26 22:08:05 ailp3 kernel: 0x00
Nov 26 22:08:05 ailp3 kernel: hci_receive_data: hci-17
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_PACKET_TYPE
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_ACL_HDR
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: New frame
Nov 26 22:08:05 ailp3 kernel: HCI: get_free_inbuffer: inbuffer 0 was free
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: WAIT_FOR_ACL_DATA
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: in_buf->count = 12
Nov 26 22:08:05 ailp3 kernel: HCI: hci_receive_data: Copied 12 bytes into
inbuffer
Nov 26 22:08:05 ailp3 kernel: HCI: process_acl_data: in_buf->count:12,
in_buf->l2cap_len:0
Nov 26 22:08:05 ailp3 kernel:     L2CAP get_lcon: lcid 64 con_list.count = 1
Nov 26 22:08:05 ailp3 kernel:           RFCOMM rfcomm_config_ind : remote
cid 64
Nov 26 22:08:05 ailp3 kernel: HCI: hci_send_data: 14 bytes
Nov 26 22:08:05 ailp3 kernel: BT SYS: l2cap channel (64,64) [RFCOMM]
connected
Nov 26 22:08:05 ailp3 kernel:           RFCOMM rfcomm_config_cfm:
Nov 26 22:08:05 ailp3 kernel: BT SYS: rfcomm_config_cfm: l2cap is now open
Nov 26 22:08:05 ailp3 kernel:           RFCOMM sending sabm
Nov 26 22:08:05 ailp3 kernel:           RFCOMM send_sabm: Creating SABM
packet to DLCI 0
Nov 26 22:08:05 ailp3 kernel: HCI: hci_send_data: 8 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: hci_clear_buffer
Nov 26 22:08:05 ailp3 kernel: HCI: get_inbuffer: Found inbuffer for hci_hdl
1 c88df614
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_data_task: 14 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_data_task: 14 bytes
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: send 14 bytes (excl HCI
header) out of 14
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: There are 5 bytes space
for the headers
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: send_acl_packet:  (19):
Nov 26 22:08:05 ailp3 kernel: 0x02 0x01 0x20 0x0e 0x00 0x0a 0x00 0x01 0x00
0x05 0x01 0x06 0x00 0x40 0x00 0x00
Nov 26 22:08:05 ailp3 kernel: 0x00 0x00 0x00
Nov 26 22:08:05 ailp3 kernel: BT DATA <--|X|     19
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: now c = 14
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: unsubscribing tx_buf.
Nov 26 22:08:05 ailp3 kernel: HCI: <--39 (7)
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: send 8 bytes (excl HCI
header) out of 8
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: There are 5 bytes space
for the headers
Nov 26 22:08:05 ailp3 kernel:
Nov 26 22:08:05 ailp3 kernel: send_acl_packet:  (13):
Nov 26 22:08:05 ailp3 kernel: 0x02 0x01 0x20 0x08 0x00 0x04 0x00 0x40 0x00
0x03 0x3f 0x01 0x1c
Nov 26 22:08:05 ailp3 kernel: BT DATA <--|X|     13
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: now c = 8
Nov 26 22:08:05 ailp3 kernel: HCI: send_acl_packet: unsubscribing tx_buf.
Nov 26 22:08:05 ailp3 kernel: HCI: <--0 (6)
Nov 26 22:08:14 ailp3 kernel: BT SYS: wq_timeout

/*****************************************************************
/*Note:When I test the same thing away 802.11 environment,the connection is
OK.
/******************************************************************

----- Original Message -----
From: "Bluetooth-dev" <bluetooth-dev@xxxxxxx.com>
To: "Bluetooth-dev" <bluetooth-dev@xxxxxxx.com>
Sent: Monday, November 26, 2001 5:46 PM
Subject: RE: RE [bluetooth-dev] re RFComm connection problem under 802.11


> Hi,
>
> It seems like you got the BB and l2cap connection with no problems. Make
sure you don't use security as rf_conn doesn't support a pincode at the
moment (try to disable CONFIG_BLUETOOTH_USE_SECURITY_MANAGER in your
kernelconfig of your server). If this doesn't help switch on all debug for
HCI, l2cap and rfcomm and send me the /proc/kmsg file to see where it goes
wrong.
>
> Best Regards
> Anders Johansson
>
> -----Original Message-----
> From: Sean [mailto:sean@xxxxxxx.tw]
> Sent: Monday, November 26, 2001 6:24 AM
> To: bluetooth-dev@xxxxxxx.com
> Subject: Fw: RE [bluetooth-dev] re RFComm connection problem under 802.11
>
>
> Hi...
> The problem occurs both the new version or old version.
> And the log message is the following ..
>
> MENU
> ------------------------
>   INQ <MAX NUMBER OF RESPONSES> (INQUIRY SCAN)
>   RF_CONN <XX:XX:XX:XX:XX:XX> <SRV CH> <LINE>
>   RF_SEND <NBR BYTES> <NBR REPEATS> <LINE>
>   RF_DISC <LINE>
>   RF_WAIT <LINE>
>   ME <1/0>
>   SETBD <XX:XX:XX:XX:XX:XX>
>   READBD
>   RESET
>   ROLE_SWITCH <XX:XX:XX:XX:XX:XX> <ROLE> (0=MASTER, 1=SLAVE)
>   PPP
>   QUIT
> > lp_connect_cfm (pos), wake up flag not set
> BT SYS: process_event: ACL link is up
> BT SYS: ERROR :process_return_param: WRITE_LINK_POLICY_SETTINGS: Unknown
HCI Command
> BT SYS: rfcomm_config_ind: Local l2cap mtu set to 672
>
> l2cap options:  (0):
> BT SYS: l2cap channel (65,64) [RFCOMM] connected
> BT SYS: rfcomm_config_cfm: l2cap is now open
> wq_timeout
> Connect failed [ Unknowed Reason]
>
> Note:This is on the server side.
> And the client side is added the blue line.
>
>
>
> ----- Original Message -----
> From: Sean <mailto:sean@xxxxxxx.tw>
> To: ??? <mailto:cheng.sean@xxxxxxx.net>
> Sent: Monday, November 26, 2001 1:18 PM
> Subject: RE [bluetooth-dev] re RFComm connection problem under 802.11
>
>
>   _____
>
> [ Date Prev <http://mhonarc.axis.se/bluetooth-dev/msg03104.html> ][ Date
<http://mhonarc.axis.se/bluetooth-dev/msg03105.html> Next][ Thread Prev
<http://mhonarc.axis.se/bluetooth-dev/msg03103.html> ][ Thread Next
<http://mhonarc.axis.se/bluetooth-dev/msg03104.html> ][ Date
<http://mhonarc.axis.se/bluetooth-dev/maillist.html#03106> Index][ Thread
Index <http://mhonarc.axis.se/bluetooth-dev/threads.html#03106> ]
>
> RE: [bluetooth-dev] re: RFComm connection problem under 802.11
>
>   _____
>
>
> * To: Bluetooth-dev < bluetooth-dev@xxxxxxx.com
<mailto:bluetooth-dev@xxxxxxx.com> >
>
> * Subject: RE: [bluetooth-dev] re: RFComm connection problem under 802.11
>
> * From: Bluetooth-dev < bluetooth-dev@xxxxxxx.com
<mailto:bluetooth-dev@xxxxxxx.com> >
>
> * Date: Sun, 25 Nov 2001 15:50:10 +0100
>
> * Sender: owner-bluetooth-dev@xxxxxxx.com
<mailto:owner-bluetooth-dev@xxxxxxx.com>
>
>   _____
>
> Hi,
>
>
>
> When did the problem occur (after a new version of the stack or?). Please
send some more information (logs etc.) to be able to help you.
>
>
>
> Best Regards
>
> Anders Johansson
>
>
>
> > -----Original Message-----
>
> > From: Sami Kibria [ mailto:skibria@xxxxxxx.ca
<mailto:skibria@xxxxxxx.ca> ]
>
> > Sent: Friday, November 23, 2001 6:58 PM
>
> > To: sean@xxxxxxx.tw
>
> > Cc: bluetooth-dev
>
> > Subject: [bluetooth-dev] re: RFComm connection problem under 802.11
>
> >
>
> >
>
> > hi sean...i have been using the bluetooth driver as well, open, send
>
> > data, and closing connections...but now i can't either...
>
> >
>
> > the funny thing is that we have always has the 802.11a environment in
>
> > our office and it used to work fine but no it doesn't...why???
>
> >
>
> > i have no idea...
>
> >
>
> > i am stuck just like you...and i could use some help as well!
>
> >
>
> > :)
>
> >
>
> > --
>
> > --------------------------------------------------------------------
>
> > Sami Kibria
>
> > Researcher
>
> > TRLabs -> Winnipeg, Manitoba, CANADA
>
> > email: skibria@xxxxxxx.ca
>
> >
>
> >     __   _
>
> >    / /  (_)__  __ ____  __
>
> >   / /__/ / _ \/ // /\ \/ /  . . .  t h e   c h o i c e   o f   a
>
> > /____/_/_//_/\_,_/ /_/\_\              G N U   g e n e r a t i o n
>
> >
>
> > --------------------------------------------------------------------
>
> >
>
> > -
>
> > To unsubscribe from this list: send the line "unsubscribe
>
> > bluetooth-dev" in
>
> > the body of a message to majordomo@xxxxxxx.com
>
> >
>
> -
>
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
in
>
> the body of a message to majordomo@xxxxxxx.com
>   _____
>
>
> * Prev by Date: [bluetooth-dev] Function
<http://mhonarc.axis.se/bluetooth-dev/msg03104.html> descriptions
>
> * Next by Date: RE: [bluetooth-dev]
<http://mhonarc.axis.se/bluetooth-dev/msg03105.html> Function descriptions
>
> * Prev by thread: [bluetooth-dev] re:
<http://mhonarc.axis.se/bluetooth-dev/msg03103.html> RFComm connection
problem under 802.11
>
> * Next by thread: [bluetooth-dev] Function
<http://mhonarc.axis.se/bluetooth-dev/msg03104.html> descriptions
>
> * Index(es):
>
>
> * <http://mhonarc.axis.se/bluetooth-dev/maillist.html#03106> Date
>
> * <http://mhonarc.axis.se/bluetooth-dev/threads.html#03106> Thread
>
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
in
> the body of a message to majordomo@xxxxxxx.com
>




-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com