[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: RE [bluetooth-dev] re RFComm connection problem under 802.11



Hi...
I had tried that before.and I had tried to increase all the timer in the hci
or l2cap or rfcomm layer.
But it does work.


----- Original Message -----
From: Bluetooth-dev <bluetooth-dev@xxxxxxx.com>
To: Bluetooth-dev <bluetooth-dev@xxxxxxx.com>
Sent: Tuesday, November 27, 2001 6:23 PM
Subject: RE: RE [bluetooth-dev] re RFComm connection problem under 802.11


> Hi,
>
> It seems like it's the bt_connect timer that timeout. The link however is
correctly setup but
> there is probably some interference by the 802.11 enviroment which can
trash the data over the
> link. As the link should be reliable the lower parts of the stack
(baseband etc.) should
> resend the data until it has arrived correctly to the other side. Try to
increase you timeouttime
> in bluetooth.c, located at the top:
>
> #define BT_CON_TIMEOUT (10*HZ)
>
> Change 10 -> 30 as example and see if it will succeed.
>
> BTW Which BTmodule do you use?
>
> Best Regards
> Anders Johansson
>
> > -----Original Message-----
> > From: Sean [mailto:sean@xxxxxxx.tw]
> > Sent: Monday, November 26, 2001 5:44 PM
> > To: Bluetooth-dev
> > Subject: Re: RE [bluetooth-dev] re RFComm connection problem under
> > 802.11
> >
> >
> > Hi..
> > I have made the CONFIG_BLUETOOTH_USE_SECURITY_MANAGER
> > disable,but it seem to
> > be useless.
> > I have turned on debug message and the message is the following .
> >
> -
> To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
in
> the body of a message to majordomo@xxxxxxx.com

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com