[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: RE [bluetooth-dev] re RFComm connection problem under 802.11



Hi,

Have you tried to run anything else than RFCOMM, as example test_conn from bttest (test_conn <bd> <psm=1231> <line>) or l2ca_ping?

Best Regards
Anders Johansson

> -----Original Message-----
> From: Sean [mailto:cheng.sean@xxxxxxx.net]
> Sent: Tuesday, November 27, 2001 11:33 AM
> To: Bluetooth-dev
> Subject: Re: RE [bluetooth-dev] re RFComm connection problem under
> 802.11
> 
> 
> Hi...
> I had tried that before.and I had tried to increase all the 
> timer in the hci
> or l2cap or rfcomm layer.
> But it does work.
> 
> 
> ----- Original Message -----
> From: Bluetooth-dev <bluetooth-dev@xxxxxxx.com>
> To: Bluetooth-dev <bluetooth-dev@xxxxxxx.com>
> Sent: Tuesday, November 27, 2001 6:23 PM
> Subject: RE: RE [bluetooth-dev] re RFComm connection problem 
> under 802.11
> 
> 
> > Hi,
> >
> > It seems like it's the bt_connect timer that timeout. The 
> link however is
> correctly setup but
> > there is probably some interference by the 802.11 
> enviroment which can
> trash the data over the
> > link. As the link should be reliable the lower parts of the stack
> (baseband etc.) should
> > resend the data until it has arrived correctly to the other 
> side. Try to
> increase you timeouttime
> > in bluetooth.c, located at the top:
> >
> > #define BT_CON_TIMEOUT (10*HZ)
> >
> > Change 10 -> 30 as example and see if it will succeed.
> >
> > BTW Which BTmodule do you use?
> >
> > Best Regards
> > Anders Johansson
> >
> > > -----Original Message-----
> > > From: Sean [mailto:sean@xxxxxxx.tw]
> > > Sent: Monday, November 26, 2001 5:44 PM
> > > To: Bluetooth-dev
> > > Subject: Re: RE [bluetooth-dev] re RFComm connection problem under
> > > 802.11
> > >
> > >
> > > Hi..
> > > I have made the CONFIG_BLUETOOTH_USE_SECURITY_MANAGER
> > > disable,but it seem to
> > > be useless.
> > > I have turned on debug message and the message is the following .
> > >
> > -
> > To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev"
> in
> > the body of a message to majordomo@xxxxxxx.com
> 
> -
> To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
> 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com