[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Fw: RE [bluetooth-dev] re RFComm connection problem under 802.11




----- Original Message -----
From: Sean <cheng.sean@xxxxxxx.net>
To: Anders Torbjörn Johansson <anders.t.johansson@xxxxxxx.com>
Sent: Wednesday, November 28, 2001 7:43 PM
Subject: Re: RE [bluetooth-dev] re RFComm connection problem under 802.11


> Hi...
> Yes,I had tried those,but it seems to be the same.
> I see the log message that it seems to be hold during the configure step.
> So I have no idea about how to solve this problem.
>
> ----- Original Message -----
> From: Anders Torbjörn Johansson <anders.t.johansson@xxxxxxx.com>
> To: Bluetooth-dev <bluetooth-dev@xxxxxxx.com>
> Sent: Wednesday, November 28, 2001 6:05 PM
> Subject: RE: RE [bluetooth-dev] re RFComm connection problem under 802.11
>
>
> > Hi,
> >
> > Have you tried to run anything else than RFCOMM, as example test_conn
from
> bttest (test_conn <bd> <psm=1231> <line>) or l2ca_ping?
> >
> > Best Regards
> > Anders Johansson
> >
> > > -----Original Message-----
> > > From: Sean [mailto:cheng.sean@xxxxxxx.net]
> > > Sent: Tuesday, November 27, 2001 11:33 AM
> > > To: Bluetooth-dev
> > > Subject: Re: RE [bluetooth-dev] re RFComm connection problem under
> > > 802.11
> > >
> > >
> > > Hi...
> > > I had tried that before.and I had tried to increase all the
> > > timer in the hci
> > > or l2cap or rfcomm layer.
> > > But it does work.
> > >
> > >
> > > ----- Original Message -----
> > > From: Bluetooth-dev <bluetooth-dev@xxxxxxx.com>
> > > To: Bluetooth-dev <bluetooth-dev@xxxxxxx.com>
> > > Sent: Tuesday, November 27, 2001 6:23 PM
> > > Subject: RE: RE [bluetooth-dev] re RFComm connection problem
> > > under 802.11
> > >
> > >
> > > > Hi,
> > > >
> > > > It seems like it's the bt_connect timer that timeout. The
> > > link however is
> > > correctly setup but
> > > > there is probably some interference by the 802.11
> > > enviroment which can
> > > trash the data over the
> > > > link. As the link should be reliable the lower parts of the stack
> > > (baseband etc.) should
> > > > resend the data until it has arrived correctly to the other
> > > side. Try to
> > > increase you timeouttime
> > > > in bluetooth.c, located at the top:
> > > >
> > > > #define BT_CON_TIMEOUT (10*HZ)
> > > >
> > > > Change 10 -> 30 as example and see if it will succeed.
> > > >
> > > > BTW Which BTmodule do you use?
> > > >
> > > > Best Regards
> > > > Anders Johansson
> > > >
> > > > > -----Original Message-----
> > > > > From: Sean [mailto:sean@xxxxxxx.tw]
> > > > > Sent: Monday, November 26, 2001 5:44 PM
> > > > > To: Bluetooth-dev
> > > > > Subject: Re: RE [bluetooth-dev] re RFComm connection problem under
> > > > > 802.11
> > > > >
> > > > >
> > > > > Hi..
> > > > > I have made the CONFIG_BLUETOOTH_USE_SECURITY_MANAGER
> > > > > disable,but it seem to
> > > > > be useless.
> > > > > I have turned on debug message and the message is the following .
> > > > >
> > > > -
> > > > To unsubscribe from this list: send the line "unsubscribe
> > > bluetooth-dev"
> > > in
> > > > the body of a message to majordomo@xxxxxxx.com
> > >
> > > -
> > > To unsubscribe from this list: send the line "unsubscribe
> > > bluetooth-dev" in
> > > the body of a message to majordomo@xxxxxxx.com
> > >
> > -
> > To unsubscribe from this list: send the line "unsubscribe bluetooth-dev"
> in
> > the body of a message to majordomo@xxxxxxx.com
>

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com