[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] Porting to eCos



> -----Original Message-----
> From: siumama great [mailto:siumama2000@xxxxxxx.com] 
> Sent: Thursday, December 06, 2001 09:59
> To: bluetooth-dev@xxxxxxx.com
> Subject: [bluetooth-dev] Porting to eCos
> 
> Hi,
>    I am currently porting the openbt into eCos embedded 
> system. Does anyone have tried about this b4fore. If yes,
> please give me some hints. since I found that it's complex
> to do so.
> sincerely,
> siumama

Yes, it has been done. See the message below. After some
searching, I found the interesting information at
http://www.combitechsystems.com/node2866.asp. Note that
this information was published in March, and the stack has
changed since then.

//Peter

> -----Original Message-----
> From: Andreas Karlsson [mailto:andreas_k_se@xxxxxxx.com] 
> Sent: Friday, March 16, 2001 15:37
> To: bluetooth-dev@xxxxxxx.com
> Subject: [bluetooth-dev] Port of Axis' open-source Bluetooth 
> stack to eCos
> 
> Hi all,
> I'm very glad to be able to present the sources of the WOSP-project.
> Visit www.combitechsystems.com and click on the WOSP link.
> This project was part of my Master Thesis at Blekinge 
> Institute of Technology.
> Hope this release will help you and stopping you from 
> reinventing the wheel...
> brgds
> Andreas
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com