[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: [bluetooth-dev] iPAQ with Axis OpenBT stack



It seems okay! Do you have a guide for such kind of
porting?
Thanks for your help!
Dick

 --- Tim Lindquist <tlindquist@xxxxxxx.au>
的郵件內容:> Who has had success with this?
> 
> I have been running an older version of OpenBT on
> Familiar on
> Assabet (similar to iPaq) OK,
> 
> but I have not been able to build 0.0.8 with my Arm
> Linux toolchain.
> 
> Were any special patches/procedures required?
> 
> ?? ? wrote:
> 
> >I'm also going to do the same thing.
> >My iPAQ is running familiar as its kernel.
> >So, could you provide any instruction guides on how
> to
> >port the Axis BT stack on iPAQ?
> >
> >By the way, where can I find the ARM patch?
> >Dick
> >
> >Franck THIBAUT wrote:
> >
> >>Hi,
> >>
> >>I'm trying to port AXIS BT on a iPAQ running under
> >>
> >kernel 2.4. Since USB is
> >
> >>not supported by my kernel, I try to use AXIS BT
> on
> >>
> >the serial port
> >
> >>(/dev/ttySA0), but it doesn't work : my device (an
> >>
> >ERICSSON HW) is not
> >
> >>detected by the stack and this one try to run HCI
> >>
> >EMULATOR...
> >
> >>Is there someone to help me ?
> >>
> >>thks
> >>
>
>_________________________________________________________________________
> >
> >>Get Your Private, Free E-mail from MSN Hotmail at
> >>
> >http://www.hotmail.com.
> >
> >>-
> >>To unsubscribe from this list: send the line
> >>
> >"unsubscribe bluetooth-dev" in
> >
> >>the body of a message to majordomo@xxxxxxx.com
> >>
> >
> >1. Make sure you have the ARM patch for the Axis
> stack
> >on the iPaq
> >2. Make sure the serial port is not being used as a
> >console (the kernel boot
> >commandline should NOT contain 'console=0')
> >3. Make sure inittab does not spawn any getty's on
> the
> >serial port
> >
> >--gmcnutt
> >
> >
> >
>
>_________________________________________________________
> >Do you Yahoo!?
> >行萬里路 http://travel.yahoo.com.hk
> >Comprehensive travel guide at
> http://travel.yahoo.com.hk
> >-
> >To unsubscribe from this list: send the line
> "unsubscribe bluetooth-dev" in
> >the body of a message to majordomo@xxxxxxx.com
> >
> 
> -- 
> Tim Lindquist
> 
> Managing Director
> 
> Portus Pty Limited
> P +61 2 9980 6900
> F +61 2 9980 6902
> M  0414 723 865
> 
>
---------------------------------------------------------------------
> This email and any attachments are confidential, may
> not represent
> the views of Portus Pty Limited and may be legally
> privileged. If you
> are not the intended recipient, you must not
> disclose or use the
> information contained in it. If you have received
> this email in error,
> please notify Portus Pty Limited immediately by
> email or telephone
> (+612 9980 6900) and delete the original
> transmission.
>
---------------------------------------------------------------------
> 
> 
> 
>  

_________________________________________________________
Do you Yahoo!?
曬 4R 數碼相,每張只需 $2.5 http://photos.yahoo.com.hk/
Print 4R Digital photo for $2.5 only! http://photos.yahoo.com.hk/
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com