[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

[bluetooth-dev] RE: PPP over RFComm




Date: Thu, 7 Feb 2002 11:00:05 +0800
From: h9815727 <h9815727@xxxxxxx.hk>
Reply-To: h9815727 <h9815727@xxxxxxx.hk>
Subject: RE: PPP over RFComm
To: jt@xxxxxxx.com

Hi, 

Now, I can do ping between two the EBDK with openbt stack version
20011021 
through a ppp interface. One of the linux PC has two interfaces, eth0
(LAN) 
and ppp0. The other linuz PC has only ppp interface. The eth0 interface
is 
assigned an IP address by DHCP. Intially, I have assigned IP addresses to
the 
ppp interface in the /etc/ppp/options and options.ttyBT0 files as follows

remote PC : 192.168.0.11:192.168.0.10
PC connected to the LAN : 192.168.0.10:192.168.0.11

However, when I do ping on the remote PC, I obtained the following
routing 
table.

Destination     Gateway         Genmask         Flags Metric Ref    Use
Iface
147.8.182.57    *               255.255.255.255 UH    0      0        0
ppp0
127.0.0.0       *               255.0.0.0       U     0      0        0
lo

Now, I can do ping between the remote PC (192.168.0.11) and 147.8.182.57
(DHCP 
assigned ???) My aim is to ping to the LAN as well as browse the
internet. 
What should I do ? DO I need to set the gateway and DNS and subnetmask in
my 
remote PC ??

Any helps would be appreciated.

Thanks in advance,
Leanne Chan

>

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com