[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] unwanted logs



You could hardcode the change in linux/kernel/printk.c and
modify console_loglevel to be the level you want (0 for no
logging at all).

//Peter

> -----Original Message-----
> From: Alain Paschoud [mailto:alain.paschoud@xxxxxxx.ch] 
> Sent: Friday, February 22, 2002 08:15
> To: Ilguiz Latypov
> Cc: bluetooth-dev@xxxxxxx.com
> Subject: Re: [bluetooth-dev] unwanted logs
> 
> 
> Hello,
> 
> Thank you for your proposition. But I use uClinux, so things 
> are very less versatile, because the system is smaller. In 
> facts, ht printk are directly redirected on the serial port 
> by a code in assembler that is read very early during the 
> boot, because kernel message should as soon as possible be 
> sent on serial port for debug. So I don't think I can change 
> that easily.
> 
> Best regards.
> 
> On Thu, 21 Feb 2002 10:40:53 -0500 (EST)
> Ilguiz Latypov <ilatypov@xxxxxxx.com> wrote:
> 
> > 
> > Perhaps, "echo 0 > /proc/sys/kernel/printk" can disable 
> console printk()
> > messages.  See /usr/src/linux/Documentation/sysctl/kernel.txt.
> > 
> > On Thu, 21 Feb 2002, Alain Paschoud wrote:
> > 
> > > I'll replace 
> > > printk("\nHW module contains...\n");
> > > by
> > > DOTHER("\nHW module contains...\n");
> > 
> > -
> > To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> > the body of a message to majordomo@xxxxxxx.com
> > 
> 
> 
> -- 
> Alain Paschoud                      SMARTDATA SA
> alain.paschoud@xxxxxxx.ch         PSE-A
> http://www.smartdata.ch             1015 Lausanne
> Phone +41-21-693'84'98              
> Fax   +41-27-693'84'91              
> -
> To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
> 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com