[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
RE: [bluetooth-dev] OpenBT Certification
We have certified our LAN AP which include L2CAP, RFCOMM, SDP, LAN Profile and
the GAP profile.
GAP and SDP is mandatory basic things you must support to be able to
certify your product. Depending on which profile you use in your products
other requirement will apply. Read the profile description and it will
tell which parts that are applicable. If you use a pre-qualified module
with the baseband and lower layers thoose parts are already tested and
you just need a document from the vendor saying so.
The TCI layer I'm not so familiar with but I guess it's
out of scope for such a product you are developing.
The OpenGroup has a list of BQB:s around the world at
> -----Original Message-----
> From: Dean W. Gehnert [mailto:email@example.com]
> Sent: Thursday, March 07, 2002 11:26 PM
> To: Anders Torbj rn Johansson
> Cc: Bluetooth-dev
> Subject: Re: [bluetooth-dev] OpenBT Certification
> Which parts have been certified?
> We are working on a product that uses the RFCOMM/L2CAP layers to
> send data to a Bluetooth printer. It works just fine, but we
> now need to get the product Bluetooth certified...
> There are also questions about whether we require the GAP, SDP and
> TCI layers to be BQB certifiable...
> Who was used for the BQB agent?
> Dean W. Gehnert
> Anders Torbj rn Johansson writes:
> >Yes, we are using it in our products but the stack itself hasn't
> >been certified, only the parts relevant for the product have gone
> >through the process.
> >Best Regards
> >Anders Johansson
> >> -----Original Message-----
> >> From: Dean W. Gehnert [mailto:firstname.lastname@example.org]
> >> Sent: Thursday, March 07, 2002 10:57 PM
> >> To: email@example.com
> >> Subject: [bluetooth-dev] OpenBT Certification
> >> Has anybody been through the Bluetooth certification process the
> >> OpenBT stack?
> >> Dean W. Gehnert
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to firstname.lastname@example.org