[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bluetooth-dev] Re: It seemed that bnep session hadn't know other device's IP address
BNEP knows nothing about IP or IP-addresses. It operates on layer 2,
i.e. Ethernet level. Thus, if you cannot ping something and the BNEP
link is OK, the problem is above BNEP, i.e. IP.
> Hello bluetooth-dev,
> I retry again to make bnep work ,and I found after init all the
> BT stack and BNEP connection,the "ping" cannot work,and the problem
> is it doesn't know other device's IP address(or it hadn't found any
> device with a IP)so of cource "ping" failed.
> I want to know,when I make "Box A" the bnep0 with IP 126.96.36.199 and another
> PC's bluetooth device with 188.8.131.52,and run "bnep -c" to make
> a bnep session, do both devices know other side's IP address"?
> in which step they will broadcast their IP and let other device know
> Best regards,
> nasm64 mailto:email@example.com
> Do You Yahoo!?
> Get your free @xxxxxxx.com">http://mail.yahoo.com
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to firstname.lastname@example.org