[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bluetooth-dev] Re: where i can find a 5v supply on the developer board lx?
If you look at the schematics for the dev-board:
and at the pinout for the dev-board:
you will notice that the DEBUG connector (X25) has a pin (pin 10) labeled
POWER_DC. This gives you the same DC voltage that you put in...minus a
small amount of voltage drop. You can use this pin along with a 5V
voltage regulator to power the USB.
Hope this helps,
On Mon, 17 Jun 2002, Michaela Bone wrote:
> i need 5v on the developer board for the usb
> where i can find this?
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to firstname.lastname@example.org