[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]
[bluetooth-dev] Re: [Linux-usb-users] kyocera model txdta0c01 data cable
it works now with an ericsson usb module
the mitsumi usb dongle really not work with the axis bluetooth driver
----- Original Message -----
From: "Greg KH" <firstname.lastname@example.org>
To: "Christopher Molnar" <email@example.com>
Sent: Monday, June 24, 2002 4:42 PM
Subject: Re: [Linux-usb-users] kyocera model txdta0c01 data cable
> On Sun, Jun 23, 2002 at 05:40:25PM -0400, Christopher Molnar wrote:
> > Hello,
> > I have a kyocera model txdta0c01 data cable for my Kyocera smart phone,
> > is a usb cable that replaces the serial port version of the same cable.
> > need to add this as a usb to serial port device on my laptop.
> > The device responds with:
> > Jun 23 17:38:40 cmimac kernel: hub.c: USB new device connect on bus2/1,
> > assigned device number 3
> > Jun 23 17:38:40 cmimac kernel: usb.c: USB device 3 (vend/prod
> > not claimed by any active driver.
> This device is not supported by Linux, sorry.
> You will need to ask Kyocera for the specs on the protocol that they use
> to talk to the device in order for a Linux driver to be made.
> Good luck,
> greg k-h
> Sponsored by:
> ThinkGeek at http://www.ThinkGeek.com/
> To unsubscribe, use the last form field at:
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to firstname.lastname@example.org