[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] collecting data from serial port and send via bt-radio?



Hi,

Have a look at 

http://developer.axis.com/download/devboard_bt/latest/linux-2.4.19+pan/

I guess you have the old firmware for devboard-bt, the new one will include
PAN-support.

Best Regards
Anders Johansson

> -----Original Message-----
> From: Patrick Dolz [mailto:dlzpat001@xxxxxxx.za]
> Sent: Monday, March 03, 2003 12:27 PM
> To: Anders Torbjörn Johansson
> Subject: Re: [bluetooth-dev] collecting data from serial port and send
> via bt-radio?
> 
> 
> hi anders,
> where do i find that bnep_connect and where can i read about it?
> thank's for your help,
> patrick
> ----- Original Message -----
> From: "Anders Torbjörn Johansson" <anders.t.johansson@xxxxxxx.com>
> To: "Bluetooth-dev" <bluetooth-dev@xxxxxxx.com>
> Sent: Friday, February 28, 2003 5:33 PM
> Subject: RE: [bluetooth-dev] collecting data from serial port 
> and send via
> bt-radio?
> 
> 
> Hello,
> 
> I assume you already have an application which fetch the data from the
> serialport?
> In that case you will also need to produce the XML-file from the data
> received,
> there is probably some libraries for this in Linux which can 
> be used. For
> the
> transfer I suggest you use PAN to setup a network-connection 
> over bluetooth
> and then send your generated file over standard TCP/IP. There 
> is a tool
> called bnep_connect which allows you to initiate the BT-link. 
> As example
> you have initiated the connection at bnep device 0. You can then use
> bnep0 just like a standard ethernetdevice, ifconfig bnep0 <ip> up, and
> then send data through that interface. You will probably have to setup
> your routes correct so the data is sent to the BNEP-interface instead
> of standard eth0. This is probably the easiest way to do it, otherwise
> you will have to create custom application on both sides of 
> the BT-link
> which uses, as example, rfcomm for sending the data. You can also use
> the LAN access profile which uses PPP over a rfcomm-channel 
> but my opinion
> is that LAN profile is an unnecessary complicated way to accomplish
> network connectivity over Bluetooth (that's why PAN was created :) ).
> 
> Best Regards
> Anders Johansson
> 
> > -----Original Message-----
> > From: Patrick Dolz [mailto:dlzpat001@xxxxxxx.za]
> > Sent: Friday, February 28, 2003 1:49 PM
> > To: Anders Torbjörn Johansson
> > Subject: Re: [bluetooth-dev] collecting data from serial 
> port and send
> > via bt-radio?
> >
> >
> > Anders Torbjörn Johansson wrote:
> >
> > > Hello,
> > >
> > > My suggestion is to use LAN or PAN to send the data over standard
> > > TCP/IP network. Another way to do it is to forward anything
> > from your
> > > serialport by
> > > the Serial Port Profile which emulates a serialport over
> > Bluetooth. On
> > > the other side of the connection you can then have the data
> > processed
> > > (making
> > > the XML-file or whatever) and maybe email it somewhere or
> > send it to
> > > another server in your network.
> > >
> > > Just some suggestions, there is a lot of ways to accomplish this.
> > >
> > > Best Regards
> > > Anders Johansson
> > >
> > >     -----Original Message-----
> > >     *From:* Patrick Dolz [mailto:dlzpat001@xxxxxxx.za]
> > >     *Sent:* Thursday, February 27, 2003 2:36 PM
> > >     *To:* bluetooth-dev@xxxxxxx.com
> > >     *Subject:* [bluetooth-dev] collecting data from 
> serial port and
> > >     send via bt-radio?
> > >
> > >
> > >     hi there,
> > >     i have a question: i'm trying to collect sensor data from the
> > >     serial port, wrap them in xml and send the packets via the
> > >     bluetooth radio! any suggestions what i should do?
> > >
> > >     have a good day,
> > >     patrick
> > >
> > i need to pick up the sensor data at the serial port and send
> > it via the
> > bluetooth radio to another bluetooth device.
> > is there no way i can wrap the data into xml on the 
> dev-board already?
> > thank's for your quick reply,
> > patrick
> >
> >
> >
> 
> -
> To unsubscribe from this list: send the line "unsubscribe 
> bluetooth-dev" in
> the body of a message to majordomo@xxxxxxx.com
> 
> 

-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com