[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: [bluetooth-dev] how to get bluetooth to emulate comport?



I was suggested on what to do on this list.


--- Anders Torbjorn Johansson
<anders.t.johansson@xxxxxxx.com> wrote:

> Hello Daniel,
> 
> I suggest that you post this to the Bluez-user
> mailing list.
> 
> Best Regards,
> Anders
> 
> > -----Original Message-----
> > From: owner-bluetooth-dev On Behalf Of John H.
> > Sent: den 21 mars 2005 02:11
> > To: Bluetooth-dev
> > Subject: Re: [bluetooth-dev] how to get bluetooth
> to emulate comport?
> > 
> > 
> > Not been prompted to enter pin, keep getting 
> > 
> > Can't connect RFCOMM socket: Connection refused
> > 
> > despite scan finding the device.
> > 
> > put those lm and lp entries in hcid.conf, and even
> 
> > tried(afterward)putting the following in
> rfcomm.conf
> > 
> > rfcomm0 {
> > bind no;
> > device    08:00:37:12:C4:B1;
> > channel   1;
> > comment   "PM325 by LG";
> > }
> > 
> > 
> > any ideas?
> > --- Daniel Würfel <d.wuerfel@xxxxxxx.de> wrote:
> > 
> > > Have you been told to enter a pin?
> > > Check /etc/bluetooth/hcid.conf
> > > lm accept,master;
> > > 
> > > lp hold,sniff,park,rswitch;
> > > 
> > > 
> > > Check if there is an entry "BlueZ0" in your
> handy
> > > and delete it.
> > > Then try again.
> > > 
> > > 
> > > -
> > > ---- Original Message -----
> > > From: "John H." <mistamaila@xxxxxxx.com>
> > > To: "D.W." <sword@xxxxxxx.de>;
> <bluetooth-dev@xxxxxxx.com>
> > > Sent: Wednesday, March 02, 2005 10:21 AM
> > > Subject: Re: [bluetooth-dev] how to get
> bluetooth to
> > > emulate comport?
> > > 
> > > 
> > > > /etc/rc.d/init.d/bluetooth status
> > > > hcid (pid 21924) is running...
> > > > sdpd (pid 21930) is running...
> > > >
> > > > hci0:   Type: USB
> > > >         BD Address: 00:02:72:81:AB:C4 ACL MTU:
> > > 192:8
> > > > SCO MTU: 64:8
> > > >         UP RUNNING PSCAN ISCAN
> > > >         RX bytes:1486 acl:35 sco:0 events:97
> > > errors:0
> > > >         TX bytes:1594 acl:35 sco:0 commands:42
> > > > errors:0
> > > >
> > > > hcitool scan
> > > > Scanning ...
> > > >         08:00:37:0F:84:35      
> John@PM325(PHONE)
> > > >
> > > >
> > > >  rfcomm connect 0 08:00:37:0F:84:35
> > > > Can't connect RFCOMM socket: Connection
> refused
> > > >
> > > >
> > > >
> > > > --- "D.W." <sword@xxxxxxx.de> wrote:
> > > >
> > > > > Have you been told to enter a pin? Normally
> a
> > > window
> > > > > opens in Linux when
> > > > > executing rfcomm where you can enter it.
> > > > > Then you have to enter the same pin in your
> > > phone
> > > > > when asked for.
> > > > >
> > > > > Oh sorry, I forgot something: After
> "hciconfig
> > > hci0
> > > > > up" you have to execute
> > > > > "hcid". Then run rfcomm ...
> > > > >
> > > > >
> > > > > ----- Original Message -----
> > > > > From: "John H." <mistamaila@xxxxxxx.com>
> > > > > To: <sword@xxxxxxx.com>
> > > > > Sent: Tuesday, March 01, 2005 4:33 AM
> > > > > Subject: Re: [bluetooth-dev] how to get
> > > bluetooth to
> > > > > emulate comport?
> > > > >
> > > > >
> > > > > > ok, hciconfig hci0 up works
> > > > > >
> > > > > > I tried the second part and, despite
> telling
> > > my
> > > > > pm-325
> > > > > > to be visible, and telling it waiting for
> > > pairing,
> > > > > got
> > > > > > this...
> > > > > >
> > > > > >
> > > > > > rfcomm connect 0 08:00:37:0f:84:35
> > > > > > Can't connect RFCOMM socket: Connection
> > > refused
> > > > > >
> > > > > >
> > > > > > --- "D.W." <sword@xxxxxxx.de> wrote:
> > > > > >
> > > > > > > Try this:
> > > > > > >
> > > > > > > hciconfig hci0 up
> > > > > > > rfcomm connect 0 <bt-address from your
> > > handy>
> > > > > > >
> > > > > > > Then you shoulfdhave a com port
> /dev/rfcomm0
> > > > > > > Daniel
> > > > > > > ----- Original Message -----
> > > > > > > From: "John H." <mistamaila@xxxxxxx.com>
> > > > > > > To: <bluetooth-dev@xxxxxxx.com>
> > > > > > > Sent: Thursday, February 24, 2005 3:55
> AM
> > > > > > > Subject: [bluetooth-dev] how to get
> > > bluetooth to
> > > > > > > emulate comport?
> > > > > > >
> > > > > > >
> > > > > > > > i want to use my cell phone in linux
> as i
> > > can
> > > > > in
> > > > > > > > windows, with bluetooth emulation, to
> > > connect
> > > > > to
> > > > > > > > internet via dialing #777.
> > > > > > > >
> > > > > > > > I have zonet zub6110 usb adapter,
> which I
> > > have
> > > > > > > read
> > > > > > > > works in linux.
> > > > > > > >
> > > > > > > > I am on fedora core 3.
> > > > > > > >
> > > > > > > > How do I get the com port emulation in
> > > order
> > > > > to
> > > > > > > use it
> > > > > > > > as a modem?
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > >
> > > > > > > > __________________________________
> > > > > > > > Do you Yahoo!?
> > > > > > > > Read only the mail you want - Yahoo!
> Mail
> > > > > > > SpamGuard.
> > > > > > > > http://promotions.yahoo.com/new_mail
> > > > > > > > -
> > > > > > > > To unsubscribe from this list: send
> the
> > > line
> > > > > > > "unsubscribe bluetooth-dev"
> > > > > > > in
> > > > > > > > the body of a message to
> > > majordomo@xxxxxxx.com
> > > > > > > >
> > > > > > >
> > > > > > >
> > > > > >
> > > > > >
> > > > > >
> 
=== message truncated ===


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com 
-
To unsubscribe from this list: send the line "unsubscribe bluetooth-dev" in
the body of a message to majordomo@xxxxxxx.com