[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Boot from serial port?



Hi!

Normally you don't want to boot load Etrax over a serial
port. It is much faster to boot load using Ethernet or
a parallel port. I think boot_elinux/svinto_boot
currently only supports Ethernet boot loading. 

If you really need to boot load using the serial port you
can find the information you need in chapter 4 of the 
ETRAX 100 Technical Data Sheet

http://www.developer.axis.com/doc/hardware/etrax/datasheet.html

Regards
/Mikael



-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com]On">mailto:owner-dev-etrax@xxxxxxx.com]On Behalf Of Randy Lee(õ)
Sent: Wednesday, December 20, 2000 2:30 AM
To: dev-etrax
Subject: Boot from serial port?


Hi!

I can't find any inofrmation about booting from serial port?

Are there any information about it?

Thanks

Randy

============================================
Randy Lee(AIA좬)
Sr. System Engineer.
3R Inc.
Tel) +82-2-840-3551
Email) randylee@xxxxxxx.kr
Web) http://www.3r.co.kr