[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: Accessing a UART on developer board


com1 is connecteed to Etrax serial port 0 and com2 to Erax serial
port 2. Etrax serial port 1 is available without tranceiver on
connector X25. No software changes are needed to use this port.
The port is available on /dev/ttyS1.


-----Original Message-----
From: owner-dev-etrax@xxxxxxx.com]On">mailto:owner-dev-etrax@xxxxxxx.com]On
Behalf Of Magnusson, Johan
Sent: Monday, June 25, 2001 10:54 AM
To: dev-etrax
Subject: Accessing a UART on developer board

> Hi!
> I am using my com1 and com2 and would like another serial interface for
> communication with a Bluetooth module. Since my BT module can communicate
> with UART (i prefer not to use USB) it would be great if I could access
> another UART on the developer board, which does not disable the com1, com2
> functionality.
> Does anyone know how this can be done? Can I get the UART from the PCB
> before the RS-485 trancievers (ser3?)? What software modifications are
> then required?
> /Johan