[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: setenv

> The network settings are set via setenv and then fetched from the 
> environment variables at startup. But when those settings are 
> supposed to 
> be set i get the message:
> setenv: not found.

Either you haven't upgraded JFFS (flash) or your network savings from the old JFFS were restored after upgrade (flash_all). Solution: do a factory default and you should get the new JFFS. Keep the test button (between COM1 and COM2) pressed for about 10 secs when you power up the board.

Best regards