[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

RE: porting app (again)



Mikael,

Thanks for the tip.

The upgrade indeed allowed the app to run.

Now I'm suffering from some new problems (etrax specific, as this runs under
x86).

ttyS0 flip-buffer overrun!
ttyS0 flip-buffer overrun!
ttyS0 flip-buffer overrun!
ttyS0 flip-buffer overrun!
Error 10009: excessive retries on getvar
command "image" failed, abort

I'm trying to download a 200k image over the serial port.

Small (text) transfers work fine.

Any tips?


-----Original Message-----
From: Mikael Pahmp [mailto:mikael.pahmp@xxxxxxx.com]
Sent: Wednesday, October 10, 2001 3:58 AM
To: 'Lance Ware'
Cc: dev-etrax
Subject: RE: porting app (again)


> From: Lance Ware [mailto:lware@xxxxxxx.net]
> Sent: Wednesday, October 10, 2001 05:49

> When I try running the binary on the dev board I get "no such file or
> director".
> 
> 50#
> 50# ./epinfo
> ./epinfo: no such file or directory
> 
> Not sure if this is relevant but a strings on photopc shows:
> 
> /lib/ld.so.1?? (seems odd?)

Your board may be running the older Linux 2.0 kernel (depends on when you
bought
the board). If it is, you must flash it with the new software
(devboard_lx-R2_0_0) first (using the flashit script).

/MiP