[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

Re: Fw: Flashit problem!



On Wed, 2002-01-16 at 03:21, Yongtao Ye wrote:
> Hi:
>    The new infomation is as follows. And B160 is a bottom boot.

Yes, you are right (I got confused because of the last 'T').

First try using the boot loader from the latest software
(devboard_lx-R2_1_0). It is a more up to date version of the boot loader
than the one you used (according to the log). If that doesn't work try
finding any shortcuts or lose pins (check the soldering, the chip may
not be correctly mounted). If you can't find any shortcuts or lose pins
try mounting another chip.

Best regards
/Jonas


On Wed, 2002-01-16 at 12:48, Yongtao Ye wrote:
> Hi:
>    I don't know whether my e-mail failed to send out or I failed to receive the answer.
> So I send again. Please send the answer to mailing list too.
> 
>    Thank you very much!
> 
> ----- Original Message ----- 
> From: Yongtao Ye <ytye@xxxxxxx.com>
> To: Jonas Holmberg <jonas.holmberg@xxxxxxx.com>
> Sent: Wednesday, January 16, 2002 10:21 AM
> Subject: Re: Flashit problem!
> 
> 
> > Hi:
> >    The new infomation is as follows. And B160 is a bottom boot.
> > 
> >    Thanks very much!
> > 
> > SET_REGISTER
> > 
> > 0xB0000038
> > 
> > 0x00001EF3
> > 
> > PACKET_INFO
> > 
> > 0xC0004000
> > 
> > 0x00200018
> > 
> > Checksum of file is 0x16CE2469
> > 
> > FLASH
> > 
> > 0xC0014000
> > 
> > 0x00010000
> > 
> > 0x001F0000
> > 
> > No single CFI device at 0x80000000
> > 
> > mfr: 0x00000098
> > 
> > dev_id: 0x00000043
> > 
> > Found 1 x 16Mb BB at 0x80000000
> > 
> > No single CFI device at 0x84000000
> > 
> > mfr: 0x00009898
> > 
> > dev_id: 0x00009898
> > 
> > No single x16 device at 0x84000000
> > 
> > mfr: 0x98989898
> > 
> > dev_id: 0x98989898
> > 
> > No interleaved x16 devices at 0x84000000
> > 
> > Erasing 0x001F0000 bytes at 0x80010000...done, verifying...OK
> > Flashing 0x001F0000 bytes...Verify error at 0x80011000. Try #1.
> > Verify error at 0x80011000. Try #2.
> > Verify error at 0x80011000. Try #3.
> > Verify error at 0x80011000. Try #4.
> > Verify error at 0x80011000. Try #5.
> > Verify error at 0x80011000. Try #6.
> > Verify error at 0x80011000. Try #7.
> > Verify error at 0x80011000. Try #8.
> > Verify error at 0x80011000. Try #9.
> > Fatal verify error. Aborting.
> > JUMP
> > 
> > 0x00000000
> > 
> > 
> > > >    I'm sorry! I made a mistake, my chip is TC58FVB160FT, not TC58FBT160FT. Does it means that the chip I'm using is bad and I must change another one ? 
> > > 
> > > The B160 and T160 should work the same way. It's strange that e100boot
> > > prints BB. Can you find out what device id e100boot reads from your
> > > flash? Change tools/e100boot/cbl/flash.c like this:
> > > 
> > .
> > .
> > .
> > > 
> > > Then run "make install" in tools/e100boot and "./flashit" and send me
> > > the debug log again.
> > > 
> > > /Jonas
> > 
> > /Yongtao Ye