[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

AW: Problems with ranlib-cris


I tried to port the ucd-snmp-4.2.3 to the Etrax 100 LX Board.
I took the makefiles from the uCLinux version. And then I built
the libs for the etrax 100 LX.
If you only need the libs, I could send you the libraries!!!

Andreas Auer

-----Ursprüngliche Nachricht-----
Von: owner-dev-etrax@xxxxxxx.com]Im">mailto:owner-dev-etrax@xxxxxxx.com]Im
Auftrag von Ano nymous
Gesendet: Donnerstag, 07. Februar 2002 13:55
An: dev-etrax@xxxxxxx.com
Betreff: Problems with ranlib-cris

I'm trying to port ucd-snmp-4.2.2 to Axis-etrax 100lx (deboard_lx -R2_1_0)
with the help of Rules.linux and have had some problems with that.
The current problem is with the ranlib-cris. Making the Makefile causes the
following mistake:

ranlib-cris libsucdmibs.la
ranlib-cris: libucdmibs.la: File format not recognized

There is a line LIB_EXTENSION in the Makefile which defines the ending
('la' as default) , but changing that to plain 'a' causes after a long
period of thinking lines:

collect2: ld terminated with signal 15 [Terminated], core dumped
/PATH/rld-cris: Unsupported .stab relocation
libucdmibs.a(master.o)(.text+0xd): relocation truncated to fit: R_CRIS_8 no
/PATH/rld-cris: Unsupported .stab relocation
libucdmibs.a(master.o)(.text+0x15): relocation truncated to fit: R_CRIS_16
/usr/local/cris/lib/gcc-lib/cris/2.96/rld-cris: Unsupported .stab
etc. (goes on and on)

I hope that someone could help me with this matter,